BRP BOMBARDIER DS250 2006 Shop Manual page 76

vmr2006-071-020
Inspection
Check impeller and impeller shaft for wear and
damage.
Assembly
Assembly is the reverse of disassembly proce-
dure. However, pay attention to the following.
Apply Loctite 5910 (P/N 293 800 081) on mating
surface of seal with its bore.
Use water pump oil seal installer (P/N 529 036
052) to properly install mechanical seal.
CAUTION: Using an inappropriate pusher may
damage seal or may install seal inadequately.
vmr2006-071-021
vmr2006-071
Subsection 06 (COOLING SYSTEM)
vmr2006-071-022
Install inner seal using an appropriate pusher.
vmr2006-071-020
Install inner bearing using an appropriate pusher.
CAUTION: Install a new bearing only.
vmr2006-071-023
Install impeller shaft then bearing.
Section 03 ENGINE
57