Precautions For Serial I/O (In Clock-Synchronous Serial I/O Mode) - Renesas M16C Series User Manual

M30245 Group

2.3.4 Precautions for Serial I/O (in clock-synchronous serial I/O mode)

Transmission/reception
www.DataSheet4U.com
Figure 2.3.11. Example of wiring
Rev.2.00 Oct 16, 2006
REJ09B0340-0200
(1) With an external clock selected, and choosing the RTS function, the output level of the RTSi
pin goes to "L" when the data-receivable status becomes ready, which informs the transmis-
sion side that the reception has become ready. The output level of the RTSi pin goes to "H"
when reception starts. So if the RTSi pin is connected to the CTSi pin on the transmission
side, the circuit can transmission and reception data with consistent timing. With the internal
_______
clock, the RTS function has no effect. Figure 2.3.11 shows an example of wiring.
Transmitter side IC
TxD
RxD
CLK
CTS
page 53 of 354
________
i
i
i
i
2. Clock-Synchronous Serial I/O
_______
________
________
Receiver side IC
TxD
i
RxD
i
CLK
i
RTS
i
________