Turning The Power Off - Yamaha AW2816 Owner's Manual

Before you begin

Turning the power off

When turning off the power of a system that includes
the AW2816, each device must be turned off in the
following order.
1 The monitor system connected to the output
jacks or the AW2816
B The AW2816 itself
C Any storage devices connected to the SCSI
connector of the AW2816, and external tone
generators connected to the input/output
jacks
When turning off the power of the AW2816 itself, you
must use the shutdown procedure described below.
1
In the WORK NAVIGATE section located on
the top panel of the AW2816, press the
[SONG] key.
2
Press the [F5] (SHUT DOWN) key located
below the display.
3
Press the [ENTER] key.
A message will ask you whether you want to save
the current song.
4
Use the CURSOR keys located in the right
center of the top panel to move the cursor
to the OK button, and press the [ENTER]
key.
5
When a message of "Now safe to turn off"
appears, turn off the [POWER] switch of
the rear panel.
• If you turn off the power of the AW2816 without
using the above shutdown procedure, the data on
the hard disk may be damaged.
• Never turn off the power while the access indicator
which indicates the access status of the internal hard
disk is lit. Doing so may damage the hard disk itself.
12
Operation section