Yamaha AW2816 Owner's Manual page 176

Exporting virtual tracks to WAV
files
Here's how to use the V.TR Edit page to export (write)
audio data from a virtual track 1–8 of the specified
track to a WAV file. The basic procedure is essentially
the same as in the TR Edit page.
1
Press the [EDIT] key
The EDIT screen/V.TR Edit page will appear. For
details on the contents of the display, refer to
page 116.
2
Use the REC TRACK SELECT [1]–[16] keys
to select the track (1–16) that contains the
virtual track you want to export.
As you switch tracks, the track names and track
view of virtual tracks 1–8 will also change.
3
Move the cursor to the TRACK menu if you
want to write data in Track units, to the
PART menu if you want to write data in
Part units, or to the REGION menu if you
want to write data in Region units. Then
press the [ENTER] key.
4
Move the cursor to the button of the
EXPORT command, and press the [ENTER]
key.
The parameters of the EXPORT command will
appear.
5
According to the menu that you selected in
step 3, move the cursor to the parame-
ter(s) that you want to set, and press the
[ENTER] key.
• If you selected the TRACK menu
TRACK parameter
Select the virtual track that will be written as a
WAV file. If the selected virtual track is paired, a
stereo WAV file will be written.
• If you selected the PART menu
TRACK parameter
Select the virtual track 1–8 that will be written as
a WAV file. If the selected virtual track is paired,
a stereo WAV file will be written.
START parameter
Specify the beginning of the area that will be
written as a WAV file.
END parameter
Specify the end of the area that will be written as
a WAV file.
• If you selected the REGION menu
REGION parameter
Specify the region that will be written as a WAV
file.
[F2] (V.TR Edit) key.
Operation section
6
Use the [DATA/JOG] dial or [CURSOR] keys
to set the parameters, and then press the
[ENTER] key.
7
Move the cursor to the TO DRIVE parame-
ter, and press the [ENTER] key.
8
Move the cursor to the DRIVE area located
in the upper left of the display, turn the
[DATA/JOG] dial to select the writing desti-
nation drive, and press the [ENTER] key.
Select "ATAPI" if you want to select the internal
CD-RW drive, or select a SCSI ID if you want to
select an external SCSI device.
9
Move the cursor to the EXIT button, and
press the [ENTER] key.
The writing destination drive will be confirmed,
and you will return to the screen for selecting the
various parameters of the EXPORT command.
10
As necessary, use the TO FILE parameter
and TO SIZE parameter to change the
name of the WAV file and its quantization
(number of bits).
For details on the TO FILE and TO SIZE parame-
ters, refer to page 169 to 170.
11
Move the cursor to the EXECUTE button,
and press the [ENTER] key.
A popup window will ask you to confirm the
Export operation.
12
To export the WAV file, move the cursor to
the OK button and press the [ENTER] key.
To cancel without exporting, move the cursor to
the CANCEL button and press the [ENTER] key.
11
171