Table of Contents
Advertisement
Making fine adjustments to the pitch of an
When the AW2816's internal clock is used as the
word clock source, you can adjust the sampling fre-
quency of the song to make fine adjustments to the
playback pitch (Vari-pitch). For example, you can use
this to match the playback pitch of the AW2816 to an
acoustic instrument that would be difficult to tune.
1
Press the [SETUP] key
key.
The SETUP screen/D.In Setup page will appear.
2
In the WORDCLOCK SOURCE area, make
sure that the INT button is turned on.
If the INT button is off, move the cursor to the
INT button and press the [ENTER] key. When the
INT button is on, the internal clock is selected as
the word clock source.
3
Move the cursor to the VARI button in the
VARI area, and press the [ENTER] key.
Vari-pitch will be enabled.
4
Move the cursor to the knob located at the
right of the VARI button, and use the
[DATA/JOG] dial to adjust the sampling fre-
quency (playback pitch).
The vari-pitch setting can be adjusted in the
range of –5.97% to +6.00. If necessary, you can
play back the song while you adjust this.
5
To defeat vari-pitch, move the cursor to the
FIX button and press the [ENTER] key.
The sampling frequency will return to the previ-
ous value.
Digital devices that are synchronized to the digital
audio signal being output from the AW2816 will also
be affected when you use the vari-pitch function. This
may cause problems such as failure of the sampling
frequency to lock between the AW2816 and the exter-
nal digital device connected to it.
entire song (Vari-pitch)
[F1] (D.In SETUP)
Operation section
14
217
Advertisement
Chapters
Table of Contents
