Yamaha AW2816 Owner's Manual page 168

Professional audio workstation
Hide thumbs Also See for AW2816:
Table of Contents

Advertisement

3
If you are backing up on a CD-RW drive or
MO drive, insert the media into the drive.
If the backup destination is a CD-RW drive, press
the [SHIFT] key + [F2] key to open the tray of the
CD-RW drive, and insert the CD-R/RW media.
Press the [SHIFT] key + [F1] key to close the tray
of the CD-RW drive.
If the backup destination is an MO drive, make
sure that "write protect" is not engaged for the
MO disk, and insert it into the drive.
4
Move the cursor to the upper part of the
display, use the [DATA/JOG] dial to select
the song that you want to back up, and
press the [ENTER] key.
In the BACKUP SONG area, the button will
change from "DISABLE" to "ENABLE," indicating
that the song has been selected for backup. The
"O" symbol at the left side of the list will change
to " " for songs that have been selected for
backup.
5
If you want to backup several songs at the
same time, repeat step 4.
Tip!
• If you want to back up all songs, move the cursor to
the ALL ENABLE button located in the center of the
display, and press the [ENTER] key.
• If you want to remove all songs from the selection
for backup, move the cursor to the ALL DISABLE
button and press the [ENTER] key.
6
When you are finished making settings,
move the cursor to the EXECUTE button
and press the [ENTER] key.
A popup window will ask you to confirm the
backup operation.
7
To execute the backup, move the cursor to
the OK button and press the [ENTER] key.
To cancel the backup, move the cursor to
the CANCEL button and press the [ENTER]
key.
When you move the cursor to the OK button and
press the [ENTER] key, the backup operation will
occur in one of the following ways, depending
on the storage device that you selected as the
backup destination.
CD-RW drive
If you are backing up on CD-R media or on new CD-
RW media, the backup will begin immediately.
If you are backing up on previously-recorded CD-RW
media, a popup window will ask you to confirm that
you want to erase the media. When you move the cur-
sor to the OK button and press the [ENTER] key, the
media will first be erased, and then the backup will be
performed.
If the selected song(s) do not fit on a single volume of
media, a message will ask you to insert another vol-
ume of media. Eject the media and insert a new vol-
ume.
Removable drive such as MO
drive
If "TYPE1" is selected as the backup format, the media
will first be formatted, and then the backup will be
performed. If the selected song(s) do not fit on a single
volume of media, a message will ask you to insert
another volume of media. Insert a new volume of
media.
If "TYPE2" is selected as the backup format, backup
will begin immediately.
External hard disk
Backup will begin immediately.
• If you back up across multiple volumes of removable
media, make a note of the numerical sequence on
the label of each media volume.
• It is not possible to stop the backup process while it
is being executed.
Tip!
• The backed-up song data also includes the audio
data for Undo.
• If you are backing up to a CD-RW drive, you can
perform a writing test before the actual backup, or
compare the backed-up data with the original data
after the backup is performed. To use these func-
tions, access the UTILITY screen/Prefer.3 page, and
change the settings of the CD BACKUP/WAV-EXP
MODE area ( P.268).
Operation section
11
163

Advertisement

Table of Contents
loading

Table of Contents