Yamaha AW2816 Owner's Manual page 104

Transport/Locate operations
6
Rewinding for a specific distance (Rollback)
When the transport is stopped or playing, you can
press the [ROLL BACK] key of the locate section to
rewind for a specific distance. (This is called the Roll-
back function.) This is convenient when you would
like to record from a point slightly earlier than the cur-
rent location, or when you want to hear a passage
once again during playback. The distance that is
rewound by the Rollback function ("rollback time") is
5 seconds by default, but this can be changed as
desired.
1
Press the [UTILITY] key
The UTILITY screen Prefer.2 page will appear.
The rollback time can be specified in the ROLL-
BACK TIME area of this page.
2
Move the cursor to the ROLLBACK TIME
area, and use the [DATA/JOG] dial to set
the rollback time.
The rollback time can be set in millisecond units
over a range of 0–30 seconds.
3
When the song is stopped or playing, press
the [ROLL BACK] key.
The transport will rewind by the distance you
specified in step 2.
98
[F3] key.
Operation section