Yamaha AW2816 Owner's Manual page 341

FADER EDIT MODE = ABSOLUTE
Previously-recorded
fader movement
Start recording
RET = off
END =
off
END =
on
FADER EDIT MODE = RELATIVE
Previously-recorded
fader movement
Start recording
RET = off
END =
off
END =
on
D
AUTOMIX TRANSPORT
Use the following five buttons to control automix
recording and playback.
• ABORT button
This button stops recording automix and discards
the changes that occurred. If you move the cursor
to this button and press the [ENTER] key while
recording automix, a popup window will ask you
whether you want to discard the contents of the
recorded automix. If you use this button while
automix is playing, automix will stop.
• STOP button
This button stops recording/playback of automix. If
you move the cursor to this button and press the
[ENTER] key while recording automix, a popup
window will ask you whether you want to update
the recorded contents. Even if you use this button
to stop the automix, the song will not stop.
Newly-recorded
fader movement
Stop recording
RET = on
Newly-recorded
fader movement
Stop recording
RET = on
Reference section
• PLAY button
This button indicates the on/off status for automix
start/stop. (Operating this button will not cause
automix to begin.) If the AUTOMIX button (1) is
set to "ENABLE" and automix has already been
recorded, automix playback will begin when you
press the [PLAY] key of the transport section, and
the PLAY button will turn on (will light).
When automix is in record-ready mode, moving the
cursor to the PLAY button during playback and press-
ing the [ENTER] key will cause automix recording to
begin.
• REC (Record) button
When automix is stopped, moving the cursor to
this button and pressing the [ENTER] key will
cause the REC button to blink, and automix will be
in record-ready mode. If you start the recorder
running in this state, automix recording will begin.
When recording ends, the REC button will also
automatically turn off (will go dark). While auto-
mix is playing back, you can use this button in
conjunction with the PLAY button to punch-in.
• AUTO REC button
When you move the cursor to this button and
press the [ENTER] key, the AUTO REC button will
light, and automix will be in record-ready mode. If
you start the recorder running in this state, auto-
mix recording will begin automatically. However
unlike the REC button, the AUTO REC button will
not turn off (will not go dark) even when automix
recording ends. To return to the Off state, move the
cursor to this button once again and press the
[ENTER] key.
Tip!
For details on automix operation, refer to page 133.
E
FREE
This displays the amount of remaining automix
memory in kilobytes and as a percentage.
F
SIZE
This indicates the size in kilobytes of the current
automix (the automix that is currently operating)
and of the undo buffer (dedicated memory for
automix undo).
Tip!
The undo buffer preserves the previously-recorded
automix data. If you want to discard the most recently
recorded automix and return to the previous state, use
the UNDO button ( J ).
G
OVERWRITE
Use the following four buttons to select the param-
eters that will be recorded in the automix.
• FADER button
If this button is on, fader and AUX send fader oper-
ations of each channel will be recorded.
• CH ON (Channel on) button
If this button is on, [ON] key operations of each
channel will be recorded.
339