Yamaha AW2816 Owner's Manual page 197

7
On the AW2816, begin playing the song.
When the song begins playing, MTC will be
transmitted from the MTC OUT connector, and
the external device will begin running from the
same location. When you stop the AW2816
song, MTC transmission will stop and the exter-
nal device will also stop.
Tip!
• Conversely from the above example, it is also possi-
ble to send MTC from an external device to the
AW2816's MIDI IN connector, and synchronize the
AW2816 as the MTC slave (the device that receives
MTC). However to stabilize the operation of the
recorder, we recommend that you use the AW2816
as the MTC master whenever possible.
• You can skew (change the time correspondence
between) the running position of the song and the
external device by changing the Time Code Top set-
ting (the time code time corresponding to the begin-
ning of the song) in the SONG screen/Setting page.
Operation section
13
193