Rec Track Select Section; Recorder Section - Yamaha AW2816 Owner's Manual

Parts and their functions
1

REC TRACK SELECT section

1
2
A
[CUE] key
This key allows the output of tracks 1–16 or the
stereo track to be monitored directly from the
MONITOR OUT jacks without passing through
the monitor channel.
Use the REC TRACK SELECT keys (3) to select a
track. When you press the [CUE] key, the [CUE]
key and the REC TRACK SELECT keys will blink,
allowing you to select a track. Press a REC TRACK
SELECT key to select a track, and that key will
light.
B
[METER] key
This key accesses the METER screen, where you
can view meters of the input/output level of tracks
1–16 and the output level of the stereo output
channel.
C
REC TRACK SELECT [1]–[16]/[ST]
These keys select the recording track (tracks 1–16
or the stereo track).
D
[ALL SAFE] key
This key cancels record-ready mode for all tracks.
If any tracks are muted, all muting will be can-
celled.
18
3 4
Operation section

RECORDER section

1 2
A
[TRACK] key
This key accesses the TRACK screen, where you
can operate the audio tracks of the recorder sec-
tion.
B
[EDIT] key
This key accesses the EDIT screen, where you can
edit the audio tracks that have been recorded.
C
[UNDO] key
This key cancels the most recently performed
recording or editing operation, returning to the
previous state (Undo). When the Undo function is
available, the [UNDO] key will light.
D
[REDO] key
This key re-executes the recording or editing oper-
ation that was cancelled by the [UNDO] key
(Redo). When the Redo function is available, the
[REDO] key will light.
3 4