Turning The Power On; Setting The Auto Power Off Function - Yamaha PSR-I300 Owner's Manual

NOTE
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
 Setting the battery type
Depending on the battery to be installed, you may
need to change the battery type setting, although
"Alkaline (and manganese)" is set by default. After
installing new batteries, call up Function number 063
(page 57), and then set the Battery Type (recharge-
able or not).
NOTICE
• Failure to set the battery type may shorten the amount of
the battery life. Make sure to set the battery type correctly.

Turning the Power On

1
Turn down the [MASTER VOLUME] dial to "MIN."
2
Press the [ ] (Standby/On) switch to turn the
power on.
The Voice name appears on the display. Adjust
the volume as desired while playing the key-
board.
3
Press and hold the [
about a second to set the instrument to standby
mode.
CAUTION
• Even when the [ ] (Standby/On) switch is in standby sta-
tus, electricity is still flowing to the product at the mini-
mum level. Remove the electric plug from the outlet when
the instrument is not to be used for extended periods of
time, or during electrical storms.
NOTICE
• Press only the [ ] (Standby/On) switch when turning the
power on. Any other operations such as pressing the pedal
are not allowed. Doing so may cause the instrument to
malfunction.
] (Standby/On) switch for
Setting the Auto Power Off
function
To prevent unnecessary power consumption, this
instrument turns off automatically if not operated for
30 minutes by default. This non-operation time can
be changed as desired.
 To change the non-operation time
which enables Auto Power Off
Press the [FUNCTION] button several times until
"AutoOff" (Function 062; page 57) appears, and then
use the [+/YES] or [-/NO] button to select the desired
value.
Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)
Default value: 30 (minutes)
 To cancel Auto Power Off when turning
on the instrument
Turn the power on while holding down the lowest key
on the keyboard. A message "oFF AutoOff" appears
briefly, then the instrument starts up with the Auto
Power Off function disabled.
The lowest key
NOTICE
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
• When the instrument is not operated for a specified time
while connected to an external device such as an amplifier,
speaker or computer, make sure to turn off all connected
devices including the instrument, in order to protect the
devices from possible damage from power turning off
automatically. Alternately, if you want to avoid doing this,
simply disable the Auto Power Off function.
NOTE
• Generally, the data and settings are maintained even when
the power is turned off with the Auto Power Off function. For
details, see page 53.
Setting Up
PSR-I300 Owner's Manual
13