Commands And Parameters Of The Part Menu - Yamaha AW2816 Owner's Manual

Commands and parameters of
the PART menu
The PART menu contains commands that edit the
desired area (Part) of audio in the selected track. The
following pages describe the commands and parame-
ters that can be selected from the PART menu.
Settings/parameters marked by an asterisk (*) cannot
be selected in the V.TR Edit page.
ERASE
Erase all audio data from the specified part. If all
audio data of the track is erased, the track name will
change to "-NO REC-".
• TRACK
Select the track from which you want to erase
audio data. If you select "AL" (*) as the setting, all
virtual tracks currently selected for tracks 1–16
will be selected for erasure.
• ALL V.TR (All virtual tracks) (*)
Specify whether you want to erase data from all
virtual tracks included in the track (Yes) or only
the virtual track currently selected for the track
(No).
• START
Specify the beginning of the part that you want to
erase.
• END
Specify the end of the part that you want to erase.
• EXECUTE
Execute the command.
START END
1 2 3 4 5
ERASE
1 2 3 4 5
A B C
A B C
Operation section
DELETE
Delete all audio data from the specified part. Any
existing audio data later than the deleted data will be
moved forward according to the length of the deleted
part.
• TRACK
Select the track from which you want to delete
audio data. If you select "AL" (*) as the setting, all
virtual tracks currently selected for tracks 1–16
will be selected for deletion.
• ALL V.TR (All virtual tracks) (*)
Specify whether you want to delete data from all
virtual tracks included in the track (Yes) or only
the virtual track currently selected for the track
(No).
• START
Specify the beginning of the part that you want to
delete.
• END
Specify the end of the part that you want to
delete.
• EXECUTE
Execute the command.
START END
1 2 3 4 5
DELETE
1 4 5 4 5 A B
COPY
Copy the audio data of the specified part to the speci-
fied location of the specified track.
• FR.TRACK (From track)
Select the copy source track.
• FR.START (From start)
Specify the beginning of the copy source part.
• FR.END (From end)
Specify the end of the copy source part.
• ALL V.TR (All virtual tracks) (*)
Specify whether you want to copy all virtual
tracks included in the copy source track (Yes) or
only the virtual track currently selected for that
track (No).
• TO TRACK
Specify the copy destination track.
• TO START
Specify the beginning of the copy destination.
• TIMES
Specify the number of times (1–99) that the data
will be copied.
A B C
C
121
7