Yamaha AW2816 Owner's Manual page 372

Effects Parameters
REV+CHORUS
Reverb and chorus effects in parallel.
Parameter
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21.2 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
FREQ. 0.05–40.00 Hz
PM DEP. 0–100%
AM DEP. 0–100%
MOD.DLY 0.0–500.0 ms
WAVE Sine, Tri
REV/CHO 0–100%
MIX BAL. 0–100 [%]
REV->CHORUS
Reverb and chorus effects in series.
Parameter
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21.2 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
FREQ. 0.05–40.00 Hz
PM DEP. 0–100%
AM DEP. 0–100%
MOD.DLY 0.0–500.0 ms
WAVE Sine, Tri
REV.BAL 0–100%
MIX BAL. 0–100 [%]
370
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation speed
Pitch modulation depth
Amp modulation depth
Modulation delay time
Modulation waveform
Reverb and chorus balance (0% = chorus, 100% = reverb)
Mix balance of the effects and dry sounds
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Modulation speed
Pitch modulation depth
Amp modulation depth
Modulation delay time
Modulation waveform
Reverb and chorused reverb balance (0% = chorused reverb, 100% =
reverb)
Mix balance of the effects and dry sounds
Appendix
Description
Description