Yamaha AW2816 Owner's Manual page 228

Copying delay time/phase settings to all
Here's how delay time and phase settings (normal/
reverse) can be copied from one channel to all chan-
nels (except the stereo output channel).
1
Press the [DYN] key
or the [DYN] key
key.
The phase/delay settings of each channel will be
displayed. Press the [F3] (DLY/Ø 1-8) key to view
input channels 1–8, or press the [F4] (DLY/Ø
MONI) key to view monitor channels 1–16.
2
Move the cursor to the desired item of the
copy source channel (the DELAY numerical
box or the Ø button).
Move the cursor to the DELAY setting if you want
to copy the delay time, or to the Ø setting if you
want to copy the phase setting.
The copy operation cannot be executed when the cur-
sor is at the delay on/off button.
3
Press the [SHIFT] key + [F5] (COPY TO ALL)
key.
A popup window will ask you to confirm the
copy operation.
4
To execute the copy, move the cursor to
the OK button and press the [ENTER] key.
To cancel the copy, move the cursor to the CAN-
CEL button and press the [ENTER] key.
When you copy to paired channels, the same delay
time/phase setting will be copied to both channels.
channels
[F3] (DLY/Ø 1-8) key
[F4] (DLY/Ø MONI)
Operation section
14
225