Yamaha AW2816 Owner's Manual page 331

EDIT screen
Edit tracks
Function
Assign a name to each track, and edit
audio data by tracks, parts, or regions.
Key operation
• [EDIT] key [F1] (TR Edit) key
• Repeatedly press the [EDIT] key until
the screen shown at the right appears.
Screen functions
A
TRACK menu
Here you can select commands to edit tracks of
audio data. When you move the cursor to this
menu and press the [ENTER] key, a list of buttons
for selecting the commands will be displayed
(below center). Then move the cursor to the com-
mand you want to execute and press the [ENTER]
key, and a list of buttons for the parameters of that
command will be displayed (below right).
Menu Command
TR Edit page
4
1
2
3
9
When the parameter buttons are displayed, you
can move the cursor to the button of the currently-
highlighted command and press the [ENTER] key
to return to the list of commands. If you move the
cursor to the highlighted menu at the top of the list
and press the [ENTER] key, you will return to the
first menu list.
B
PART menu
Here you can select commands to edit the desired
range (part) of a track. The method of selecting a
command from the PART menu and accessing
parameters is the same as for the TRACK menu
(1).
C
REGION menu
Here you can select commands to edit pieces of
audio data that were recorded in a single opera-
tion (regions). The method of selecting a command
from the REGION menu and accessing parameters
is the same as for the TRACK menu (1).
Tip!
For details on the commands that can be selected from
the TRACK/PART/REGION menus and their parame-
ters, refer to page 118.
D
Pairing
When you move the cursor to this column and
Parameter
press the [ENTER] key, pairing will be enabled (or
cancelled) for adjacent odd-numbered
numbered tracks. Paired tracks are indicated by a
" " symbol, and unpaired tracks are indicated by
a "
tracks of a pair will be affected by your editing.
Reference section
5 6 7 8
" symbol. When editing tracks or parts, both
even-
329