Yamaha AW2816 Owner's Manual page 281

Parameter 1 Parameter 2 Parameter 3
ON/OFF
Q LOW
F LOW
G LOW
Q L-MID
F L-MID
G L-MID
Q H-MID
EQ
F H-MID
G H-MID
Q HIGH
F HIGH
G HIGH
ATT.
Parameter 1 Parameter 2 Parameter 3
ON/OFF
THRESHOLD
ATTACK
G/RANGE
DYNAMICS
REL/HLD H
REL/HLD L
RAT/DEC H
K/DEC L/W
Parameter 1 Parameter 2 Parameter 3
EFFECT1 H
EFFECT1 L
EFFECT
EFFECT1
EFFECT2 H
EFFECT2 L
EFFECT2
Parameter 1 Parameter 2 Parameter 3
PAN
CHANNEL
BALANCE
Control the channel EQ and attenuation. Use parameter 2 to select the
type of parameter that you want to control, and use parameter 3 to
specify the desired channel.
EQ on/off
Q of the LOW band EQ
F (frequency) of the LOW band EQ
G (gain) of the LOW band EQ
Q of the L-MID band EQ
F (frequency) of the L-MID band EQ
G (gain) of the L-MID band EQ
Q of the H-MID band EQ
F (frequency) of the H-MID band EQ
G (gain) of the H-MID band EQ
Q of the HIGH band EQ
F (frequency) of the HIGH band EQ
G (gain) of the HIGH band EQ
Attenuation
INPUT 1–8 Input channel 1–8
MONI 1–16 Monitor channel 1–16
RETURN 1/2 Return channel 1/2
ST OUT Stereo output channel
Control the dynamics processor of the channel. Use parameter 2 to
select the type of parameter that you want to control, and use parame-
ter 3 to select the desired channel.
Dynamics processor on/off
THRESHOLD
ATTACK
GAIN or RANGE
RELEASE ... (1) or HOLD ... (2)
RELEASE ... (1) or HOLD ... (2)
RATIO, or DECAY ... (1)
RATIO, DELAY ...(2), or WIDTH
INPUT 1–8 Input channel 1–8
MONI 1–16 Monitor channel 1–16
ST OUT Stereo output channel
Control the parameters of internal effect 1/2. Use parameter 2 to select
effect 1 or 2, and use parameter 3 to select the desired effect parameter.
PARAM 1–15 Internal effect 1 ...(1)
PARAM 1–15 Internal effect 2 ...(2)
PARAM 1–15 Parameter number 1–15
MIX BAL MIX BAL parameter of internal effect 1
PARAM 1–15 Internal effect 2 ...(1)
PARAM 1–15 Internal effect 2 ...(2)
PARAM 1–15 Parameter number 1–15
MIX BAL MIX BAL parameter of internal effect 2
Control the channel pan (or balance). Use parameters 2 and 3 to specify
the desired channel.
INPUT 1–8 Input channel 1–8
MONI 1–16 Monitor channel 1–16
RETURN1 L/R L/R of effect return 1
RETURN2 L/R L/R of effect return 2
ST OUT Balance of the stereo output channel
Reference section
Content
Content
Content
Content
279