Yamaha AW2816 Owner's Manual page 48

The following table shows how the parameters con-
trolled by faders 1–8 will change depending on the
fader mode.
Fader
mode
MIXING LAYER : INPUT [1–8]
HOME Input levels of input channels 1–8
Send levels from input channels 1–8
AUX 1
to AUX bus 1
Send levels from input channels 1–8
AUX 2
to AUX bus 2
Send levels from input channels 1–8
AUX 3
to AUX bus 3
Send levels from input channels 1–8
AUX 4
to AUX bus 4
Send levels from input channels 1–8
AUX 5
to AUX bus 5 (effect 1)
Send levels from input channels 1–8
AUX 6
to AUX bus 6 (effect 2)
Fader
STEREO fader
mode
HOME
AUX 1
AUX 2
AUX 3 Output level of the stereo output
channel
AUX 4
AUX 5
AUX 6
3
To operate the mix parameters of a specific
channel, access the corresponding screen/
page, and press the [SEL] key of the desired
channel.
To set mix parameters such as pan, EQ, and
dynamics, access the screen/page for that param-
eter, and press the [SEL] key for the desired chan-
nel to select it. (Alternatively, you can select the
channel before you access the screen/page.)
The [SEL] key of the corresponding channel will
light. Also, that channel will be selected in the
display as the object of operations.
Faders 1–8
MIXING LAYER : RECORDER [1–8] MIXING LAYER : RECORDER [9–16]
Input levels of monitor channels
1–8
Send levels from monitor channels
1–8 to AUX bus 1
Send levels from monitor channels
1–8 to AUX bus 2
Send levels from monitor channels
1–8 to AUX bus 3
Send levels from monitor channels
1–8 to AUX bus 4
Send levels from monitor channels
1–8 to AUX bus 5 (effect 1)
Send levels from monitor channels
1–8 to AUX bus 6 (effect 2)
[RTN 1] control
Level of return channel 1
Send level from return channel 1 to
AUX bus 1
Send level from return channel 1 to
AUX bus 2
Send level from return channel 1 to
AUX bus 3
Send level from return channel 1 to
AUX bus 4
—
Send level from return channel 1 to
AUX bus 6 (effect 2)
Operation section
Input levels of monitor channels
9–16
Send levels from monitor channels
9–16 to AUX bus 1
Send levels from monitor channels
9–16 to AUX bus 2
Send levels from monitor channels
9–16 to AUX bus 3
Send levels from monitor channels
9–16 to AUX bus 4
Send levels from monitor channels
9–16 to AUX bus 5 (effect 1)
Send levels from monitor channels
9–16 to AUX bus 6 (effect 2)
[RTN 2] control
Level of return channel 2
Send level from return channel 2 to
AUX bus 1
Send level from return channel 2 to
AUX bus 2
Send level from return channel 2 to
AUX bus 3
Send level from return channel 2 to
AUX bus 4
Send level from return channel 1 to
AUX bus 5 (effect 1)
—
2
39