Yamaha AW2816 Owner's Manual page 51

5
Use the Fs and Recbit buttons to select the
sampling frequency and number of quanti-
zation bits for the newly created song.
• It is not possible to change the sampling frequency
or quantization after creating the song.
• The quantization you select here will affect the
number of tracks that can be played back simulta-
neously while multiple tracks are being recorded
simultaneously. If you need 8 tracks of simultaneous
recording and 16 tracks of simultaneous playback,
you must select 16 bit ( P.33).
• If you intend to write the song to an audio CD, you
must select 44.1 kHz as the sampling frequency. It is
not possible to create an audio CD from a song
whose sampling frequency is 48 kHz.
6
Move the cursor to the OK button and
press the [ENTER] key.
The MIXER DATA IMPORT popup window will
appear. In this popup window you can choose to
import (load) various settings such as mixer data
(not audio data) from the current song into the
newly created song. For this example, you do not
need to make any selection here.
Tip!
• If you select 48 kHz as the sampling frequency, a
popup window will appear following step 5, inform-
ing you that it will not be possible to create a CD
from this song. Move the cursor to the OK button
and press the [ENTER] key.
• Mixer data can be imported even after a new song is
created ( P.155).
7
Move the cursor to the OK button and
press the [ENTER] key.
A NAME EDIT popup window will appear,
allowing you to assign a name to the new song.
8
Use the character palette to input a song
name of up to 64 characters. (For details
on inputting characters, refer to page 37.)
When you are finished, move the cursor to
the OK button and press the [ENTER] key.
A COMMENT EDIT popup window will appear,
allowing you to assign a comment to the new
song.
9
As desired, input a comment in the same
way as you input the song name. Then
move the cursor to the OK button and
press the [ENTER] key.
The new song will be created.
Tip!
• The song name and comment can be modified even
after the new song is created ( P.150).
• In steps 5–8, you can cancel creation of a new song
by moving the cursor to the CANCEL button and
pressing the [ENTER] key.
Operation section
3
43