Yamaha AW2816 Owner's Manual page 79

Chapter
4
Assigning signals to input channels/
In the Input Patch section, input signals such as signals
received at the input jacks, the output from the inter-
nal effects, and the output of the internal metronome
can be assigned to input channels 1–8 and return
channels 1/2.
Tip!
To return the input patch section to its default state,
recall scene number 00 or patch library number 00.
To change the patching shown above, use the follow-
ing procedure.
1
Press the [PATCH] key
key.
The PATCH screen Patch IN page will appear,
where you can patch input channels and
recorder inputs. The MIXER CHANNEL INPUT
ASSIGN area of this page displays the signals that
are assigned to input channels 1–8 and return
channels 1/2
Input/output patching
This chapter explains how input/output signals and input/output
jacks can be assigned to the various signal routes within the
AW2816.
return channels (Input Patch)
1
2
INPUT
3
jacks
8
OPTION I/O
slot
I/O card
DIGITAL STEREO
IN jack
Metronome
[F1] (Patch IN)
With the default settings of an AW2816 song, the
input signals shown in the following diagram are
assigned to input channels 1–8 and return channels 1/
2.
8
2
1
2
Effect 1
2
Effect 2
1
2
A
Signals assigned to input channels 1–8
B
Signals assigned to return channels 1/2
Operation section
Mixer section
Input channel 1
Input channel 2
Input channel 3
Input channel 8
Return channel 1
Return channel 2
4
71