Yamaha AW2816 Owner's Manual page 89

5
In the same way, use patch cables to con-
nect other direct outputs and recorder
inputs.
Tip!
• To cancel an individual patch cable, move the cursor
to the CLEAR button located at the right of the REC.
TR area, and press the [ENTER] key.
• To cancel all patch cables, move the cursor to the
ALL CLEAR button located in the upper right of the
display, and press the [ENTER] key.
A maximum of eight patch cables can be connected.
After all eight have been connected, it will not be pos-
sible to change the connections unless you cancel one
of the patch cables.
6
If you want the patch source channel to
return to the default state when you
change the patching, turn on the FLAT
button in the lower left of the display.
If the FLAT button is on (highlighted), channel
library number 01 will be recalled to input chan-
nels to which a patch cable is connected when
you execute Quick Rec, and the mix parameters
will be initialized.
7
When you have finished making all neces-
sary patch cable connections, move the
cursor to the EXECUTE button in the lower
right of the display, and press the [ENTER]
key.
A popup window will ask you to confirm execu-
tion of Quick Rec.
8
To execute Quick Rec, move the cursor to
the OK button and press the [ENTER] key.
To abort the operation, move the cursor to the
CANCEL button and press the [ENTER] key.
When you execute Quick Rec, the internal set-
tings of the AW2816 will change as follows.
• Input patch and recorder input patch settings will
change according to the selected input signals
and patch cable connections.
• Assignments to the stereo bus will be forcibly
defeated for input channels to which patch cable
are connected.
• If the FLAT button is on, mix parameters of patch
source input channels will be initialized.
• Channel library number 01 will be recalled for
track monitor channels to which a patch cable is
connected, initializing their mix parameters.
9
Hold down the REC [ ] key and press the
PLAY [ ] key.
When you execute Quick Rec, all tracks to
which a patch cable is connected will be set to
record-ready mode. Thus, you can simply hold
down the REC [ ] key and press the PLAY [
key to begin recording on the corresponding
tracks.
Operation section
4
]
81