Yamaha AW2816 Owner's Manual page 284

Professional audio workstation
Hide thumbs Also See for AW2816:
Table of Contents

Advertisement

MIDI screen
B
ALL button
When you move the cursor to this button and
press the [ENTER] key, all of the buttons in the (1)
area will be on. In addition, categories for which
the transmitted content can be specified (SCENE
MEM.–REMOTE) will be set to the "ALL" selection.
C
REQUEST button
When you move the cursor to this button and
press the [ENTER] key, a "Bulk Dump Request"
message will be sent from the MIDI OUT/TO
HOST connector, requesting the bulk dump data
that you selected in (1).
Use this function when you have connected the
MIDI IN/MIDI OUT connectors of two AW2816
units to each other, and want to copy scene mem-
ories or libraries from one AW2816 to the other.
AW2816
Bulk dump: reception on
MIDI OUT
Bulk dump data
MIDI IN
AW2816
Bulk dump: reception on
D
TRANSMIT button
When you move the cursor to this button and
press the [ENTER] key, the bulk dump data
selected in (1) will be transmitted from the MIDI
OUT/TO HOST connector.
Use this when you want to save bulk dump data
on an external device such as a MIDI sequencer.
Before transmitting bulk dump data or bulk dump
request messages to the AW2816, you must turn Bulk
Dump Data Reception "on" in the MIDI screen MIDI
Setup 1 page.
282
E
MIDI IN
Request message
MIDI OUT
Reference section
INTERVAL
This specifies the interval that will be left between
data blocks when a bulk dump is transmitted from
the AW2816. This setting can be made in 1 milli-
second increments over a range of 0–300 millisec-
onds. (Default setting= 0)
Tip!
Depending on the device that is receiving the bulk
dump data, errors may occur during bulk dump recep-
tion. If this occurs, try increasing the INTERVAL ( 5 )
setting. If a bulk dump is being performed between
two AW2816 units, leave the INTERVAL setting at
zero.
The time required for receiving or transmitting a bulk
dump will depend on the selected category and the
recorded data. In particular in the case of automix, be
aware that a longer time may be required depending
on how much data has been recorded.

Advertisement

Table of Contents
loading

Table of Contents