Yamaha AW2816 Owner's Manual page 269

F
TIME
This specifies the interval of playback (Nudge
Time) that is repeated by the Nudge function. This
can be adjusted in 1 millisecond increments over
a range of 25–800 milliseconds (default setting=
100 milliseconds).
For details on using the Nudge function, refer to
page 96.
G
CD/DAT DIGITAL REC
This setting specifies whether digital recording
from a CD player or DAT recorder connected to
the DIGITAL STEREO IN connector, or importing
from an audio CD inserted in the CD-RW drive
will be allowed (ENABLE) or prohibited (DIS-
ABLE). If the button is displayed as "DISABLE,"
moving the cursor to the button and pressing the
[ENTER] key will display the following warning
message.
When you move the cursor to the NEXT button
and press the [ENTER] key, the second page of the
warning message will be displayed.
If you move the cursor to the YES button and press
the [ENTER] key, the warning message will disap-
pear, and the button will change to "ENABLE."
H
DIGITAL OUT COPYRIGHT
This setting specifies whether SCMS (Serial Copy
Management System) copy protect data will be
enabled (ENABLE) or not (DISABLE) for the digital
signal output from the DIGITAL STEREO OUT
jack. When you move the cursor to this button and
press the [ENTER] key, the setting will alternate
between ENABLE/DISABLE.
Even if this is set to ENABLE, it will be possible to
digitally record onto a DAT/MD recorder con-
nected to the DIGITAL STEREO OUT connector,
but it will not be possible to make second-genera-
tion digital copies.
• If DIGITAL OUT COPYRIGHT is set to ENABLE
AW2816
DAT or MD, etc.
Reference section
DIGITAL OUT COPYRIGHT
= ENABLE
Digital recording
possible
Digital recording
not possible
267