Recording - Yamaha AW2816 Owner's Manual

Recording

Now we will record the bass sound on track 3.
1
In the Locate section, press the [
The counter in the display will rewind to the zero
location (00:00:00.000).
2
To begin recording, hold down the REC
[ ] key and press the PLAY [
The REC [ ] key and PLAY [
and recording will begin.
3
While listening to the rhythm machine
(drums) you previously recorded on tracks
1/2, play your bass.
If you want to change the monitor balance
between the rhythm machine (drums) and bass,
press the RECORDER [1-8] key of the MIXING
LAYER section, and adjust faders 1–3.
4
When you are finished playing, press the
STOP [ ] key.
The REC [ ] key and PLAY [
and recording will stop.
5
To listen to the recorded content, press the
[ ] key, and then press the PLAY [
key.
If you decide to re-do the recording, stop the
song, press the [UNDO] key to cancel the previ-
ous recording, and then repeat steps 1–4.
Tip!
You can press the [IN] key of the Locate section to
return instantly to the location at which recording
was last begun.
6
If you are satisfied with your recording,
press the REC TRACK SELECT [3] key to dis-
able record-ready mode.
Tip!
• You can also re-record from the middle of the song.
If you are repeatedly re-recording the same region,
it is convenient to set a marker or a locate point at
that location for quick access ( P.102), or to use the
auto punch-in/out function ( P.64).
• The basic procedure described above also applies
when you want to record additional instruments on
the remaining tracks. Go ahead and record the
remaining instruments for your song in the same
way.
] key.
] key.
] key will light,
] key will go dark,
]
Operation section
3
57