Yamaha AW2816 Owner's Manual page 306

DYN/DLY screen
Storing and recalling dynamics processor settings
Function
Store dynamics processor settings in
the library, or recall stored programs.
Key operation
• [DYN] key [F2] (Library) key
• Repeatedly press the [DYN] key until
the screen shown at the right appears.
Screen functions
A
SEL CH (Select channel)
This indicates the channel that is currently
selected by its [SEL] key. The displayed abbrevia-
tions have the following meaning.
• INPUT 1–8 .......... Input channel 1–8
• MONI 1–16......... Monitor channel 1–16
• ST OUT ............... Stereo output channel
B
CURRENT DYNAMICS CURVE/TYPE
This shows the approximate characteristics and
type of the current dynamics processor.
C
GR (Gain reduction)
This displays the amount of gain reduction produced
by the dynamics processor, in a range of –18 dB–
0 dB.
D
Output meter
This indicates the signal level after passing through
the dynamics processor.
E
TITLE EDIT button
This button edits the name (library title) of the set-
tings stored in the library. When you move the cur-
sor to this button and press the [ENTER] key, a
TITLE EDIT popup window will appear, allowing
you to edit the library title.
Library numbers 1–40 are recall-only preset programs,
and their name cannot be changed. Numbers in which
no dynamics program has been stored are displayed as
"No Data!," and their title cannot be changed.
304
Library page
1
5
6
7
F
RECALL button
This button recalls the settings currently selected
in the library list.
Library numbers in which no dynamics settings have
been stored will be displayed as "No Data!" and can-
not be recalled.
G
STORE button
This button stores the current dynamics processor
settings into the number selected in the library list.
If dynamics processor settings have already been
saved in that number, they will be overwritten by
the new settings.
It is not possible to store to recall-only library numbers
1–40.
H
Library list
This displays the dynamics library list. The row
enclosed by the dotted line is the library number
currently selected by the [DATA/JOG] dial. The
columns of the list display the following informa-
tion.
• NO. ..................... The library number 1–128
• LIBRARY TITLE .... The library title and the type
• ROM ................... Recall-only settings are indi-
Reference section
2 3 4
8 9
used by the settings. If noth-
ing has been stored, this will
indicate "No Data!"
cated by the " " symbol.