Yamaha AW2816 Owner's Manual page 226

Recalling dynamics processor set-
tings from a library
1
Use the [SEL] keys to select the channel for
which you want to recall settings, and
press the [DYN] key
The DYN/DLY screen/Library page will appear,
with the corresponding channel selected.
2
Use the [DATA/JOG] dial to select the
library number whose settings you want to
recall.
Tip!
The CURVE/TYPE area at the right of the list will
show the currently selected dynamics processor set-
tings.
3
Move the cursor to the RECALL button,
and press the [ENTER] key.
A popup window will ask you to confirm the
recall operation.
Tip!
It is also possible to recall the library directly without
displaying the popup window. To do this, access the
UTILITY screen/Prefer.1 page ([UTILITY] key
key), and turn the RECALL CONFIRMATION setting
off.
4
To execute the recall, move the cursor to
the OK button and press the [ENTER] key.
To cancel the recall, move the cursor to the CAN-
CEL button and press the [ENTER] key.
If you recall to a paired channel, the same settings
will be recalled to both channels.
Tip!
Dynamics libraries can also be recalled using automix.
[F2] (Library) key.
[F2]
Operation section
Editing the title of a dynamics
library
1
Press the [DYN] key
The DYN/DLY screen/Library page will appear.
2
Use the [DATA/JOG] dial to select the
library whose title you want to edit.
3
Move the cursor to the TITLE EDIT button,
and press the [ENTER] key.
The TITLE EDIT popup window will appear.
4
Use the character palette to input the
desired library title.
For details on inputting characters, refer to
page 37.
5
To update the library title, move the cursor
to the OK button and press the [ENTER]
key.
To cancel the title you input, move the cursor to
the CANCEL button and press the [ENTER] key.
[F2] (Library) key.
14
223