Yamaha AW2816 Owner's Manual page 377

DELAY->REV
Delay and reverb effects in series.
Parameter
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB.DLY 0.0–1000.0 ms
FB.GAIN –99 to +99%
DELAY HI 0.1–1.0
REV TIME 0.3–99.9 s
INI.DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21.2 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru
DLY.BAL 0–100%
MIX BAL. 0–100 [%]
DIST->DELAY
Distortion and delay effects in series.
Parameter
DST1, DST2, OVD1,
DST TYPE
OVD2, CRUNCH
DRIVE 0–100
MASTER 0–100
TONE –10 to +10
N.GATE 0–20
DELAY 0.0–2725.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
DLY BAL 0–100%
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
Delay high-frequency feedback ratio
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left-right reverb spreed)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and delayed reverb balance (0% = delayed reverb, 100% =
delay)
Mix balance of the effects and dry sounds
Range
Distortion type (DST = distortion, OVD = overdrive)
Distortion drive
Master volume
Tone control
Noise reduction
Delay time
Feedback gain (plus values for normal-phase feedback, minus values
for reverse-phase feedback)
High-frequency feedback ratio
Modulation speed
Modulation depth
Distortion and delay balance (0% = distortion, 100% = delayed dis-
tortion)
Appendix
Description
Description
375