Home Screen - Yamaha AW2816 Owner's Manual

How to read the Reference section
This page explains how to read the Reference section.
1
2
Monitor the input level of each channel
3
Function
This page displays the input level of input
channels 1–8, return channels 1/2, and
monitor channels 1–16.
4
Key operations
• [HOME] key
• Repeatedly press the [HOME] key until
the screen shown at the right appears.
5
Screen functions
A
B
C
D
A
Screen name
B
Page name/title
C
Function
A brief explanation of the functions available in
this page.
D
Key operation
The procedure for accessing this page from the
panel.
indicates the order in which keys are to be
pressed.
Example: [SONG] key
(After pressing the [SONG] key, press the [F1] key)
+ indicates that you should hold down one key
and press the other key.
Example: [SHIFT]] key + [SONG] key
(Hold down the [SHIFT] key and press the
[SONG] key)
236

HOME screen

IN/Rtn/MONI page
[F1] (IN/Rtn/MONI) key
Level meters
This area indicates the input level of each channel.
Below each level meter, the location of the fader
for that channel is displayed in dB units.
PRE EQ button
POST EQ button
POST FADER button
Use these three buttons to select the location
within the signal routing that will be displayed by
the level meters (1). Turning on the PRE EQ but-
ton will display the pre-EQ signal level, the POST
EQ button will display the post-EQ signal level,
and the POST FADER button will display the post-
fader signal level. This is convenient when you
want to see the location at which the input signal
of that channel is clipping.
PRE EQ POST EQ POST FADER
METER METER METER
ON LEVEL
PAN
ATT
4BAND EQ
DYNAMICS
etc.
[F1] (Song List) key
Reference section
1
2 3 4
E
STEREO OUT LEVEL
This displays the position of the STEREO fader in
dB units.
Additional functions in the IN/Rtn/
MONI page
In the IN/Rtn/MONI page, holding down the [SHIFT]
key will assign the following additional function to
the [F1] key.
• [F1] (PEAK HOLD) key
Switches the Peak Hold function on/off. When
peak hold is on, a " " symbol indicating the
peak level will be maintained in the level meter
(1). The peak hold setting also affects the level
meters displayed in pages other than in the EQ/
ATT/GRP screen and the DYN/DLY screen.
E
Functions in the screen
Explanations of the functions or displays in this
screen.
F
Additional functions
Explanations of the additional functions assigned
to the function keys ([F1]–[F5] keys) in this page.
You must hold down the [SHIFT] key in order to
access these additional functions.
5
6