Yamaha AW2816 Owner's Manual page 211

Using the default MIDI Remote
settings
When the AW2816 is in the default state, messages
are already assigned to faders 1–8 and [ON] keys 1–8.
Here's how to use these default MIDI Remote settings.
1
Connect the AW2816's MIDI OUT/THRU
connector to the MIDI IN connector of the
external device.
For details on connections and settings, refer to
page 189.
2
In the FADER MODE section, press the
[REMOTE] key.
The REMOTE screen will appear, where you can
operate the MIDI Remote function. The REMOTE
screen has four pages, Remote A–Remote D, and
in each page you can assign different MIDI mes-
sages to faders 1–8 and [ON] keys 1–8. The MIDI
messages assigned by default to the faders and
[ON] keys in the Remote A–Remote D pages are
listed in page 317.
While the REMOTE screen is displayed, the STEREO
fader, [RTN 1]/[RTN 2] controls, and the various [ON]
keys will function in the same way as when the HOME
screen is displayed. (They will control the input/out-
put levels of the stereo output channel and return
channels 1/2, and switch them on/off.)
3
Press one of the [F1]–[F4] keys to access
the page (Remote A–Remote D) in which
the MIDI message you want to transmit
has been assigned to a fader/[ON] key.
In this example, the Remote C page has been
selected.
4
Move the cursor to the REMOTE x setting
(x is a character A–D) in the right side of
the display, and press the [ENTER] key.
The button will change from "DISABLE" to
"ENABLE," and the MIDI Remote function will
be enabled for the corresponding page (in this
example, the Remote C page). In this state, oper-
ating the faders 1–8/[ON] keys will transmit the
MIDI message assigned to the corresponding
controller.
Tip!
Each of the Remote A–D pages can be enabled/dis-
abled independently. The MIDI Remote function can-
not be used when you have accessed a page that is set
to DISABLE.
5
Operate faders 1–8/[ON] keys 1–8.
The MIDI message assigned to the corresponding
fader/[ON] key will be transmitted from the MIDI
OUT connector.
Tip!
Operations of the MIDI Remote faders 1–8/[ON] keys
1–8 can be recorded in the automix. When this func-
tion is operated manually, only eight channels of fad-
ers and [ON] keys can be operated simultaneously,
but by using automix to record operations in each
page one after another, you can simultaneously play
back 32 channels of fader and [ON] key operations.
Operation section
13
207