Yamaha AW2816 Owner's Manual page 142

Using automix
9
8
Press the top panel PLAY [
back the song.
When the song begins playing, the REC button in
the display will switch to on (highlighted), and
automix recording will begin. While automix is
being recorded, the [AUTOMIX] key will light
external device.
9
While listening to the song, operate the
faders of the selected channels.
10
When you are finished with operations,
press the top panel STOP [
the song.
The REC button in the display will return to off
(normal display), and automix recording will
stop. The [AUTOMIX] key will now be lit green.
A popup window will appear in the display, ask-
ing you whether you want to update the recorded
content.
11
If you want to update the recorded con-
tent, move the cursor to the OK button
and press the [ENTER] key.
If you want to discard the recorded content,
move the cursor to the CANCEL button and press
the [ENTER] key, and the automix will return to
its previous state.
Tip!
• As an alternative to pressing the STOP [
can also stop automix recording by using the STOP
button in the display. In this case, automix recording
will stop, but the song will continue playing.
• Even after updating the recorded contents of auto-
mix, you can move the cursor to the UNDO button
located in the right of the display and press the
[ENTER] key to return to the state prior to recording
(Undo). The top panel [UNDO] key cannot undo
automix.
136
] key to play Playing back the automix
1
] key to stop
2
Tip!
3
] key, you
Operation section
In the AUTOMIX screen/Main page, make
sure that the REC button and AUTO REC
button are turned off.
Locate the song to a point slightly earlier
than where you began recording automix,
and press the top panel PLAY [
The PLAY button in the display will turn on (the
STOP button will turn off), and automix will
begin playing automatically.
If you begin playback from the middle of the song,
automix will also begin playback from that same loca-
tion. In this case if there are any automix events ear-
lier than the location at which playback was begun,
automix playback will begin from a state in which all
of those events have been executed.
To stop the automix, move the cursor to
the STOP button in the display and press
the [ENTER] key, or press the top panel
STOP [ ] key.
Even if you yourself do not stop the automix, it
will stop automatically after the last event
recorded in automix has been executed.
] key.