Yamaha AW2816 Owner's Manual page 182

Playing an audio CD (CD Play)
An internal or external CD-RW drive can be used to
play back a conventional audio CD or CD-R/RW
media to which audio data has been written (CD Play
function).
It is not possible to play CD-R media that has not
been finalized.
Tip!
The CD Play function is also able to play audio from a
mixed-mode CD-ROM (only track 2 and later) or CD
Extra (first session only).
1
Press the [CD] key
The CD Play page will appear, where you can
use a CD-RW drive to play back an audio CD.
2
Move the cursor to the DRIVE area in the
upper left of the display, use the [DATA/
JOG] dial to select the CD-RW drive, and
press the [ENTER] key.
3
Press the [SHIFT] key + [F2] key.
The tray of the CD-RW drive will open.
4
Insert the audio CD that you want to play
into the tray, and press the [SHIFT] key +
[F1] key.
The tray of the CD-RW drive will close.
5
Move the cursor to the button in the CD
PLAY MODE area, and press the [ENTER]
key.
The button in the CD PLAY MODE area will
change from OFF to ON, and the CD Play func-
tion will be on. The display will show track infor-
mation for the CD that is inserted in the CD-RW
drive.
[F2] key.
Operation section
A
This area indicates the currently selected
track number (TRACK area) and the elapsed
time (TIME area).
B
This area lists the track numbers on the CD
(TRACK area), and the time length of each
track (TIME area).
It is not possible to switch to another screen while the
CD Play function is on.
6
Press the PLAY [ ] key to play a track, or
the STOP [ ] key to stop.
During playback, the audio output of the CD-RW
drive will be sent directly to the stereo output
channel. Use the STEREO fader to adjust the vol-
ume.
When the CD Play function is on, the keys of the
transport section will have the following func-
tions.
Key
PLAY [ ] key
STOP [ ] key
FF [ ]/REW[ ] keys
[ ]/[ ] keys
* The FF [ ]/REW[
when the audio CD is stopped. Fast-forward and
rewind operations will be executed only while
you continue pressing the FF [
keys.
Tip!
You can also select tracks by moving the cursor to the
list in the right side of the display, and using the
[DATA/JOG] dial and [ENTER] key.
• While the CD Play function is on, no signals other
than the audio output of the CD-RW drive will be
sent to the stereo bus.
• While an audio CD is playing, the access indicator in
the display section will blink.
1
2
Function
Play the audio CD
Stop the audio CD
Fast-forward/rewind
Select tracks
] keys can be used only
] or REW[ ]
177
11