Yamaha AW2816 Owner's Manual page 252

CD screen
Use a CD-RW drive to create an audio CD
Function
Write the stereo track data of the song
to CD-R/RW media to create an audio
CD (Mastering function).
Key operation
• [CD] key [F1] (CD Write) key
• Repeatedly press the [CD] key until
the screen shown at right appears.
Screen functions
A
DRIVE
Select an internal or external CD-RW drive. Move
the cursor to this area and use the [DATA/JOG]
dial to select "ATAPI" (internal CD-RW drive) or a
SCSI ID number (external CD-RW drive), and then
press the [ENTER] key to confirm your selection.
B
FINALIZE button
This button writes track locations and other infor-
mation into the data area to "finalize" CD-R media
that was written using the "track at once" method.
This button will be displayed only if the TRACK AT
ONCE button (3) is turned on.
CD-R media to which audio data was recorded using
the "track at once" method cannot be played on a con-
ventional CD player or by the CD Player function of
the AW2816 until the media has been finalized.
C
TRACK AT ONCE button
D
DISC AT ONCE button
Use these two buttons to select one of the follow-
ing two methods by which data will be stored on
the CD-R or CD-RW media.
• Track At Once
This method records audio data as individual
tracks on the CD. This can be selected only if the
media is CD-R. A CD-R disc that was recorded
using this method allows additional data to be
written, as long as the disc has not yet been final-
ized. (However, CD-R media that has not yet been
250
CD Write page
1
2
3
4
5
finalized cannot be played on a conventional CD
player or by the CD Player function of the
AW2816.)
• Disc At Once
This method records all tracks (the entire disc) at
once. CD-R/RW media recorded using this
method will be finalized automatically.
E
WRITE SPEED buttons
Use the x1, x2, x4, and x6 buttons to select the
writing speed (single speed/double speed/quad
speed/6x speed). Normally you will select the fast-
est speed that your CD-RW drive supports.
F
Track list
In this area you can view and select the stereo
track(s) that will be written to each track of the CD.
The line enclosed by the dotted lines is the track
that is selected for the current operation. The fol-
lowing information is shown in each column of
the track list.
• TRACK ................. This indicates the CD track
• SONG NAME ...... This shows the song name of
Reference section
8 9 K J L
number. Move the cursor to
this area and use the [DATA/
JOG] dial to select the track
to which the operation will
apply.
songs that contain a stereo
track. Move the cursor to this
area and use the [DATA/JOG]
dial to select the stereo track
that will be written to the cor-
responding track.
6
7