Yamaha AW2816 Owner's Manual page 332

EDIT screen
Tip!
• It is possible to move the cursor to the ( 4 ) area only
if the three menus TRACK/PART/REGION are dis-
played.
• The pairing settings you make in this page are linked
with the TRACK screen/V.Track page.
E
T (Track)
This column displays the track number 1–16.
F
NAME
This column displays the name of the virtual track
currently selected for each track 1–16. Tracks in
which nothing has been recorded are displayed as
"-NO REC-". When you record something on such
a track, it will automatically be assigned a name of
"V.Tr x-y" (x= track number 1–16, y= virtual track
number 1–8).
Tip!
A name of up to 16 character can be assigned to a vir-
tual track, but only the first 8 characters will be dis-
played in the NAME column ( 3 ).
G
V (virtual track)
This shows the virtual track number (1–8) that is
currently selected for each track 1–16.
Tip!
Virtual tracks are selected in the TRACK screen/
V.Track page.
H
Track view
In this area, the regions included in each track are
displayed as a bar graph. The vertical line in the
track view area indicates the location at which the
area for editing has been set. The symbols dis-
played at the bottom of the track view area indi-
cate locate points and markers.
While editing, the track and area selected for edit-
ing will be displayed as follows.
Track to be edited
When you specify an editing source and editing
destination track/range (e.g., when copying or
moving audio data), the display will be as follows.
Edit source track
Edit destination track
330
Edited area
Edit source area
Edit destination area
Reference section
I
Parameter setting area
In this area you can set the parameters for execut-
ing the selected command.
Tip!
• For details on track editing operations, refer to
page 111.
• If markers or locate points have been set within the
song, you can use the [
[IN]/[OUT] keys, and [A]/[B] keys to specify the edit-
ing location or editing range.
The keys of the transport section will have no effect
while the TR Edit page is displayed.
Additional functions in the TR Edit
page
In the TR Edit page you can press the [SHIFT] key to
assign the following additional functions to the [F1]–
[F3] keys.
• [F1] (REMAIN) key
Displays the remaining recordable time (hours:
minutes) in the counter located in the upper part
of the display. Hold down the [SHIFT] key and
press the [F1] key once again to return to the nor-
mal counter display.
• [F2] (X-ZOOM IN) key
Each time you press the [SHIFT] key + [F2] (X-
ZOOM IN) key, the track view 8 will zoom-in on
the time axis in four levels.
• [F3] (X-ZOOM OUT) key
Each time you press the [SHIFT] key + [F3] (X-
ZOOM OUT) key, the track view 8 will zoom-out
on the time axis in fout levels.
]/[ ] keys, LAST REC