Dynamics Library - Yamaha AW2816 Owner's Manual

Other functions
14
Storing dynamics processor settings
Dynamics processor settings made for each channel
can be stored in a memory area called the Dynamics
Library. The stored settings can be recalled at any
time.
Storing dynamics processor set-
tings in a library
1
Use the [SEL] keys to select the channel
whose settings you want to store, and
press the [DYN] key
The DYN/DLY screen/Library page will appear,
with the corresponding channel selected. In this
page, dynamics processor settings for the cur-
rently selected channel can be stored in or
recalled from the library.
Tip!
The currently selected channel is indicated in the
upper left of the display.
2
Use the [DATA/JOG] dial to select the
library number (041–128) into which the
settings will be stored.
The row enclosed by the dotted line is the cur-
rently selected library.
• Library numbers 001–040 contain recall-only librar-
ies with pre-programmed dynamics processor set-
tings. Dynamics settings cannot be stored in these
libraries.
• If you overwrite a previously-stored library number,
the original data cannot be recovered.
3
Move the cursor to the STORE button and
press the [ENTER] key.
The TITLE EDIT popup window will appear,
allowing you to specify the library title.
222

(Dynamics Library)

[F2] (Library) key.
Operation section
4
Use the character palette to input the
desired library title.
For details on inputting characters, refer to
page 37.
Tip!
If desired, you can store without inputting the library
title when you press the STORE button. To do this,
access the UTILITY screen/Prefer.1 page ([UTILITY]
key [F2] key), and turn the STORE CONFIRMA-
TION setting off. When you store, the title of the most
recently recalled library will be assigned automati-
cally.
5
Move the cursor to the OK button and
press the [ENTER] key.
The settings will be stored in the specified library.
Tip!
The contents stored in the dynamics library are saved
on the internal hard disk as part of the current song.
You can also use the MIDI Bulk Dump function to
save dynamics library settings on a sequencer or other
external MIDI device.