Yamaha AW2816 Owner's Manual page 272

UTILITY screen
Assign additional functions to the [CTRL] key + function keys
Function
Select the functions that will be exe-
cuted when you hold down the [CTRL]
key and press a function key [F1]–[F5].
Key operation
• [UTILITY] key [F5] (CTRL Key
Asgn.) key
• Repeatedly press the [UTILITY] key
until the screen shown at the right
appears.
Screen functions
A
CTRL+F1–CTRL+F5
This area displays the function that is currently
assigned to each combination of the [CTRL] key
and the [F1]–[F5] keys. When you move the cursor
to the desired combination and press the [ENTER]
key, the corresponding graphic of the [CTRL] key
and [F1]–[F5] keys will be highlighted, and will be
selected for assignment.
B
Function list
Here you can specify the function that will be
assigned to the key combination you selected in
(1). The line enclosed by the dotted frame is the
currently selected function. The following func-
tions can be assigned.
Display
No assignment
NO ASSIGN
Display the SONG screen/
Shut Down page (shortcut
SHUT DOWN
to shutdown)*
Display the SONG screen/
Song List page, and move
SONG SAVE the cursor to the SAVE but-
ton (shortcut to save the
current song)*
Close the tray of the CD-RW
CD LOAD
drive and load the CD*
Open the tray of the CD-RW
CD UNLOAD
drive*
Switch automix on (Enable)
AUTOMIX
[ENABLE/DISABLE] or off (Disable)*
270
CTRL Key Asgn. page
3
Function
Reference section
1
Display
Switch the AW2816
MTC SYNC [MAS-
between MTC master (Mas-
TER/SLAVE]
ter) or MTC slave (Slave)*
Display the currently-
recalled scene name in the
SCENE NAME
upper right of the screen for
a fixed length of time
Recall scene number xx (use
SCENE RECALL
the [DATA/JOG] dial to
NO.xx
select xx)
Switch delay on/off for the
DELAY [ON/OFF]
selected channel
Switch EQ on/off for the
EQ [ON/OFF]
selected channel
Switch the dynamics proces-
sor on/off for the selected
DYN [ON/OFF]
channel
PEAK HOLD [ON/
Switch peak hold on/off
OFF]
Switch the test tone oscilla-
OSCILLATOR [ON/
OFF] tor on/off
* Depending on the operating state of the
AW2816, functions marked with an asterisk may
not be executed (such as when the transport is
running). In such cases, an error message will
appear at the bottom of the display.
2
Function