Recording Additional Mix Elements - Yamaha AW2816 Owner's Manual

Using automix
9

Recording additional mix elements

Other mixing elements of the same channel can be
recorded (overwritten), adding them to the previously-
recorded automix. For example after you have
recorded the fader operations, you can overwrite pan
and EQ operations for the same channels. As an
example, this section how pan operations for channel
1 can be overwritten into the automix, adding them to
the previously-recorded fader operations for the mon-
itor channels.
1
Locate the song to a location slightly earlier
than the point where you want to begin
overwriting.
2
Press the [AUTOMIX] key
The AUTOMIX screen/Main page will appear.
Make sure that the AUTOMIX button indicates
"ENABLE."
3
Move the cursor to the OVERWRITE area.
Turn on the PAN button, and turn off the
other buttons (FADER, CH ON, EQ).
4
Move the cursor to the REC button in the
display, and press the [ENTER] key.
The automix will be in record-ready mode.
5
Press the [PAN] key
The PAN screen/Pan MONI page will appear,
where you can make pan settings for the monitor
channels.
Tip!
If you want to record operations other than channel
fader operations or scene recall operations, access the
desired screen after putting automix in record-ready
mode (or while automix is actually being recorded).
Switching screens will not cause record-ready mode
to be cancelled.
6
Press the RECORDER [1-8] key
1.
[SEL] key 1 will blink, and monitor channel 1
will be selected. In the display, the cursor will
move to the PAN knob of monitor channel 1.
138
[F1] key.
[F2] key.
[SEL] key
Operation section
7
Press the top panel PLAY [
back the song.
The song will start playback, and simultaneously,
automix recording (and playback of the recorded
events) will begin.
8
Use the [DATA/JOG] dial to operate the
pan (PAN knob) of monitor channel 1.
Tip!
Pan operations can also be recorded by using the PAN
knob displayed in the VIEW screen/CH View page.
9
When you are finished operating the pan,
press the top panel STOP [
A popup window will ask you whether you want
to update the recorded contents.
10
If you want to update the recorded con-
tents, move the cursor to the OK button
and press the [ENTER] key.
] key to play
] key.