Yamaha AW2816 Owner's Manual page 92

2
Turn the [DATA/JOG] dial to select the pro-
gram that you want to recall.
The row enclosed by the dotted frame is the cur-
rently selected effect program. When you select
an effect program, the effect type used by that
program will be displayed at the right of the list.
For this example, let's select the "Reverb Room"
program which uses the REVERB ROOM effect
type.
Tip!
When this page is displayed, you can use the [DATA/
JOG] dial to select a program regardless of the loca-
tion of the cursor.
3
Move the cursor to the RECALL button and
press the [ENTER] key.
A popup window will appear, asking you to con-
firm the effect program recall operation.
Tip!
It is also possible to recall an effect program directly,
without displaying the above popup window. To do
so, access the UTILITY screen Prefer.1 page ([UTIL-
ITY] key [F2] key), and turn the RECALL CONFIR-
MATION setting OFF.
4
To recall the effect program, move the cur-
sor to the OK button and press the [ENTER]
key.
The selected effect program will be recalled to
effect 1, and its name will be displayed in the
CURRENT EFFECT NAME area at the upper left
of the display.
If you decide not to recall the effect program,
move the cursor to the CANCEL button and press
the [ENTER] key.
5
Press the [F1] key.
The Eff.Edit page will appear, allowing you to
edit the parameters of the effect.
6
In the lower right of the display, make sure
that the MIX BAL knob is set to 100%.
The Eff.Edit page displays the effect parameters
for the currently-used effect type. For any effect
type, the MIX BAL knob (which adjusts the bal-
ance between the original sound and effect
sound) will be located at the lower right.
If you are using the effect via AUX send/return,
you will need to set the MIX BAL parameter to
100% (so that only the effect sound will be out-
put). To change this setting, move the cursor to
the MIX BAL knob, and turn the [DATA/JOG]
dial.
Tip!
• For the preset programs in library numbers 001–
041, the MIX BAL knob is set to 100% by default.
• For details on the type and function of the effect
parameters for each effect type, refer to the "Effect
parameter list" at the end of this manual.
Operation section
5
85