Yamaha AW2816 Owner's Manual page 190

If CD-R media was written using Track At Once, data
from other stereo tracks can be added as long as the
disc has not been finalized. However, media that has
not yet been finalized cannot be played on a CD-RW
drive or conventional CD player. To make CD-R
media playable on a CD player, use the following pro-
cedure to finalize it.
1
Press the [CD] key
The CD screen/CD Write page will appear. Make
sure that the CD-RW is selected in the DRIVE
area located in the upper left of the display.
2
Hold down the [SHIFT] key and press the
[F2] key to open the tray of the CD-RW
drive, and insert the CD-R media to be
finalized into the tray.
Hold down the [SHIFT] key and press the [F1]
key to close the tray.
3
Move the cursor to the TRACK AT ONCE
button, and press the [ENTER] key.
The FINALIZE button will appear at the left of the
TRACK AT ONCE button. The list in the right side
of the display will show the tracks that have been
written to the CD-R media.
Finalizing a disc
[F1] key.
Operation section
4
Move the cursor to the FINALIZE button,
and press the [ENTER] key.
A popup window will ask you to confirm execu-
tion of the Finalize operation.
5
To execute the Finalize operation, move
the cursor to the OK button and press the
[ENTER] key.
To cancel without executing, move the cursor to
the CANCEL button and press the [ENTER] key.
It is not possible to halt the operation while Finalize is
being executed.
12
185