Yamaha AW2816 Owner's Manual page 126

Editing tracks and virtual tracks
7
PITCH
Raise or lower the pitch of the entire specified track
without affecting the length of the audio.
• TRACK
Select the track whose pitch you want to change.
• PITCH
Specify the amount of pitch change in semitone
steps, over a range of ±12 semitones.
• FINE
Specify a fine adjustment in one-cent units to the
pitch change, over a range of ±50 cents.
• EXECUTE
Execute the command.
• Execution of the PITCH command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to can-
cel the command while processing is occurring.
• If multiple regions existed in a track, they will be
combined into a single region as a result of execut-
ing this command.
APPEND
Combine the multiple regions within the specified
track into a single region. Gaps between regions will
be converted to silent audio data.
• TRACK
Select the track whose regions you want to com-
bine.
• EXECUTE
Execute the command.
1 2 3 4 5
APPEND
1 2 3 4 5
Execution of the APPEND command will require more
processing time than the actual time length of the
data being processed. Also, it is not possible to cancel
the command while processing is occurring.
120
A B C
A B C
Operation section
EXPORT
Convert the audio data of the specified track into a
WAV file, and write it to a CD-RW drive, MO drive, or
similar device.
• TRACK
Select the track that you want to write as a WAV
file. If you select a track 1–16 for this setting, a
monaural WAV file for the corresponding track (a
stereo WAV files if the track is paired) will be
written. If you select "AL" (*), monaural WAV
files for all tracks 1–16 (stereo WAV files for
paired tracks) will be written. However, tracks
that do not contain a region will not be written.
• TO DRIVE
Switch to a screen where you can select the writ-
ing destination drive. In that screen, use the
DRIVE area to select the drive, move the cursor
to the EXIT button, and press the [ENTER] key to
return to the previous screen.
• TO FILE
Access a NAME EDIT popup window to edit the
filename of the WAV file. (If you select "AL" as
the setting of the TRACK parameter, it will not be
possible to edit the filename.) Input the new file-
name, move the cursor to the OK button and
press the [ENTER] key to finalize it.
• TO SIZE
When writing 24 bit audio data to a WAV file,
you can select whether it will be written as 24 bit
data (24 bit) or whether the lower 8 bits will be
discarded, converting the data to 16 bit (16 bit).
• EXECUTE
Execute the command.
1 2 3 4 5
EXPORT
1 2 3 4 5
Length of the WAV file that is actually written
• If you select "AL" for the TRACK parameter, it will
not be possible to select CD-RW for the TO DRIVE
parameter.
• Execution of the EXPORT command will require
more processing time than the actual time length of
the data being processed. Also, it is not possible to
cancel the command while processing is occurring.
Tip!
• For details on using the EXPORT command, refer to
page 167.
• With the exception of the NAME and EXPORT com-
mands of the TRACK menu, the result of the opera-
tion can be undone by pressing the [UNDO] key
immediately after execution.
• When selecting the track for the TRACK/FR.TRACK/
TO TRACK parameters, you can also use the REC
TRACK SELECT [1]–[16] keys to specify the track
number.
A B C
A B C