Yamaha AW2816 Owner's Manual page 279

Assign parameters to control change numbers
Function
Assign various internal parameters of
the AW2816 to control change num-
bers (0–95, 102–119).
Key operation
• [MIDI] key [F4] (CTL Asgn.) key
• Repeatedly press the [MIDI] key until
the screen shown at the right appears.
Screen functions
A
CTL CHG. No. (Control change number)
This column displays control change numbers to
which parameters can be assigned. Move the cur-
sor to this column and use the [DATA/JOG] dial to
select a control change number 0–95 or 102–119.
Parameters cannot be assigned to control change num-
bers 96–101, since these are used for NRPN and RPN
messages.
B
Parameter
These columns display the parameter that is
assigned to each control change number. Select
the parameter group in the left column, and select
other necessary values in the remaining two col-
umns.
C
INITIALIZE button
This button resets the control change number
assignments to the initial settings, refer to page
280.
CTL Asgn. page
1
Reference section
2
3
277