Yamaha AW2816 Owner's Manual page 347

CHANNEL
This column shows the channel of each event.
(This information is not displayed for scene num-
ber events.) You can move the cursor to this area
and turn the [DATA/JOG] dial to change the chan-
nel. The displayed abbreviations and their mean-
ings are as follows.
ST OUT ............... Stereo output channel
CH 1–CH 8 ......... Input channel 1–8
MON 1–MON16. Monitor channel 1–16
RTN 1/RTN 2....... Return channel 1/2
• Events are automatically sorted in order of time from
the beginning of the song. Thus, the displayed order
of the events may change if you edit the TIME field.
• The time (x.x) seconds shown for a fader event indi-
cates the time over which the fader moves (from the
location at which fader recording ended) back to its
original position, when recording was performed
with the FADER EDIT OUT "RET" button turned on.
(In normal operation, this will be recorded as 0.0
seconds. Alternatively, if the Fader Edit page FADER
EDIT OUT "RET" button is on, and a time has been
specified for the fader to return to its original posi-
tion, that time will be recorded.) To edit this value,
move the cursor to the event display area, and hold
down the [ENTER] key while you turn the [DATA/
JOG] dial.
C
Event selection cursor
Move the cursor to this location and turn the
[DATA/JOG] dial to select the event that you want
to edit.
D
SELECTED CH ONLY (Selected channel
only) button
If this button is on, the event list will display only
events of the channel selected by its [SEL] key.
E
REMOTE button
If this button is on, REMOTE screen operations
([ON] key and fader operations) recorded in auto-
mix will be displayed as events. The type of events
that are displayed can be selected by the CH ON
button and FADER button in the event select but-
ton area (1).
When the REMOTE button is on, the EVENT/
CHANNEL column of the event list will display the
following contents.
• EVENT
ON/OFF .............. [ON] key on/off
00–7F .................. Fader position (hexadecimal
value corresponding to 0–
127)
• CHANNEL
A - 1–8 ................ Remote A page channels 1–8
B - 1–8 ................ Remote B page channels 1–8
C - 1–8 ................ Remote C page channels 1–8
D - 1–8................ Remote D page channels 1–8
• The REMOTE screen operations recorded in automix
consist only of the operations of the [ON] keys and
the faders. Automix does not record the MIDI mes-
sages that are transmitted. If, after recording [ON]
key and fader operations in the REMOTE screen, you
change the MIDI messages that are assigned to the
[ON] keys or faders, the new MIDI messages will be
used.
• When the REMOTE button ( 5 ) is on, the SELECTED
CH ONLY button ( 4 ), SCENE/LIB button, and PAN
button will have no effect.
F
DUPLICATE button
When you move the cursor to this button and
press the [ENTER] key, the event selected in the
event list will be copied to the same location.
G
DELETE button
When you move the cursor to this button and
press the [ENTER] key, the event selected in the
event list will be deleted.
Reference section
345