Yamaha AW2816 Owner's Manual page 294

VIEW screen
When the settings of return channel 2 are
recalled to an input channel/monitor channel
Parameter
L channel setting of the return
Pan
channel will be applied.
Dynamics proces- All parameters will be reset to
sor the default values.
The recall source setting will
AUX Send 5
be applied without change.
Set to AUX Send 6 = on, Send
AUX Send 6
Level = – .
When the settings of an input channel/
monitor channel are recalled to return
channel 1
Parameter
The recall source setting will
Pan be applied to both L/R chan-
nels.
Dynamics proces-
Ignored.
sor
AUX Send 5 Ignored.
The recall source setting will
AUX Send 6
be applied without change.
When the settings of an input channel/
monitor channel are recalled to return
channel 2
Parameter
The recall source setting will
Pan be applied to both L/R chan-
nels.
Dynamics proces-
Ignored.
sor
The recall source setting will
AUX Send 5
be applied without change.
AUX Send 6 Ignored.
Libraries numbers in which no channel data has been
stored (displayed as "No Data!") cannot be recalled.
F
STORE button
This button stores the channel settings into the
number that is selected in the library list. If chan-
nel data has already been stored in that number, it
will be overwritten by the new channel data.
• It is not possible to store in the recall-only library
numbers 0/1.
• Pairing settings and effect insert settings are not
stored in the library. Nor will the pairing or effect
insert settings of the recall destination be affected
when you recall a library.
292
Behavior of recall
destination channel
Behavior of recall
destination channel
Behavior of recall
destination channel
Reference section
G
Library list
This displays a channel library list. The row sur-
rounded by a dotted line indicates the library
number that is currently selected by the [DATA/
JOG] dial. The following information is displayed
by the columns of the list.
• NO. ..................... The library number 0–64.
• LIBRARY TITLE .... The library title. If channel
data has not been stored, this
indicates "No Data!"
• ROM ................... Recall-only settings are indi-
cated by a "
H
SOURCE CHANNEL
This indicates the channel from which that library
number was stored. The meaning of the abbrevia-
tion is the same as for SEL CH (1). For library
numbers 0/1, this will display "GENERAL."
• Channel data is not compatible between the stereo
output channel and other channels (input channels,
monitor channels, return channels).
• If the currently selected channel is not compatible
with the source channel, "CONFLICT" will be dis-
played below the SOURCE CHANNEL area, and
Recall will not be possible.
Additional functions in the Library
page
In the Library page you can hold down the [SHIFT]
key to assign the following additional functions to
[F1]–[F3].
• [F1] (TITLE EDIT) key
Edits the name (library title) of the stored channel
settings. This is the same function as the TITLE
EDIT button (4).
• [F2] (RECALL) key
Recalls the channel currently selected in the
library list. This is the same function as the RECALL
button (5).
• [F3] (STORE) key
Stores the settings of the channel selected by its
[SEL] key. This is the same function as the STORE
button (6).
" symbol.