Table of Contents
Advertisement
The AW2816 has a built-in metronome that can
sound a click during song playback/recording accord-
ing to the tempo and time signature settings of the
tempo map.
1
Press the [SONG] key
key.
The SONG screen/Tempo Map page will appear.
2
Move the cursor to the METER area or
TEMPO area, and input the desired time
signature data or tempo data.
For details on inputting time signature data and
tempo data, refer to page 195.
3
Press the [TRACK] key
The TRACK screen/TR View page will appear. In
the METRO. area in the lower right of the display,
you can turn the metronome on/off and adjust its
volume.
4
Move the cursor to the ON/OFF button in
the METRO. area, and press the [ENTER]
key.
The button display will change to ON, and the
metronome function will be turned on.
Using the metronome
[F4] (Tempo Map)
[F1] (TR View) key.
Operation section
5
Move the cursor to the knob in the right of
the METRO. area, and use the [DATA/JOG]
dial to adjust the volume of the metro-
nome.
6
Play back the song.
A click sound will be output from MONITOR
OUTPUT jacks/PHONES jack, according to the
tempo map settings.
7
To silence the metronome, move the cur-
sor to the ON button in the METRO. area,
and press the [ENTER] key.
The button display will change to OFF, and the
metronome will be silenced.
Tip!
With the default settings of the AW2816, the metro-
nome will be output from the MONITOR OUTPUT
jacks/PHONES jack mixed with the other signals.
However by changing the Input Patch settings, you
can assign the metronome output to the desired input
channel ( P.71). In this case, the click sound will
always be sent to the input channel while the song is
playing, regardless of the settings in the METRO. area.
14
229
Advertisement
Chapters
Table of Contents
