Yamaha AW2816 Owner's Manual page 178

4
Move the cursor to the file list, and turn
the [DATA/JOG] dial to select the WAV file
that you want to import.
If the desired WAV file is in another directory,
move the cursor to the
[ENTER] key to move to the appropriate direc-
tory.
The AW2816 will only recognize files that have the
same sampling frequency as the current song, and
whose filename ends in an extension of ".wav". No
other WAV files will be displayed in the file list.
Tip!
• Regardless of the quantization (number of bits) of
the current song, either 16 bit or 24 bit WAV files
can be loaded. If the WAV file has a different quanti-
zation than the current song, the quantization will
be converted when the data is loaded. WAV files
other than 16 bit or 24 bit are not supported.
• Move the cursor to the "
list and press the [ENTER] key to return to the next
higher directory.
5
Move the cursor to the PASTE TO area, and
turn the [DATA/JOG] dial to specify the
track number (TR area) and virtual track
number (V area) for the import destination
track.
If you selected a stereo WAV file in step 4, you
can select odd-numbered/even-numbered pairs
of track numbers. In this case, the same virtual
track number will always be assigned.
6
Move the cursor to the location area, and
use the [DATA/JOG] dial to specify the loca-
tion in the track at which the WAV file will
be placed.
symbol and press the
" symbol in the file
Operation section
7
Move the cursor to the TYPE area. Select
"Insert" if you want to insert the WAV file
into the track, or "OverWrite" if you want
to overwrite the existing data.
If you select Insert, the audio data following the
specified location will be moved backward by
the length of the WAV file.
8
When you have finished making all set-
tings, move the cursor to the EXECUTE
button and press the [ENTER] key.
You will be asked to confirm execution of the
Import operation.
9
To execute the Import operation, move the
cursor to the OK button and press the
[ENTER] key.
To cancel without executing, move the cursor to
the CANCEL button and press the [ENTER] key.
It is not possible to halt the operation while a WAV
file is being loaded.
Tip!
After the WAV file has been loaded, you can press the
[UNDO] key to return to the state prior to loading.
11
173