CIRCUIT BOARDS(シート基板図) ....39 WIRING(結線図) INSPECTIONS(検査) ....... 62/67 CIRCUIT DIAGRAM(回路図) TEST PROGRAM(テストプログラム) ..72/82 SOFTWARE BLOCK DIAGRAM HOW TO UPGRADE THE MAIN UNIT PROGRAM (ソフトウェアブロックダイアグラム) (プログラムバージョンアップ方法) ....92 011785 20050830-オープンプライス HAMAMATSU, JAPAN Copyright (c) Yamaha Corporation. All rights reserved. PDF-K7672 ’05.08...
IMPORTANT NOTICE This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users, and have therefore not been restated.
AW2400 PROTECTION OF EYES FROM LASER BEAM DURING SERVICING (作業中のレーザー光線からの目の保護) 本製品にはクラス1レーザーが使用されています。 レーザー This product employs Class 1 laser. Labels on laser are に関するラベルが内蔵CD-RWドライブの上部、 および本製 located on the upper side of the internal CD-RW drive and 品のリアパネルにあります。 the rear panel of this product. <Rear view>...
Page 9
AW2400 2. Rear Panel(リアパネル) r q w !2 !3 !4 !5 !6 q [MIC/LINE INPUT(XLR)] 端子 1 ∼ 8 q [MIC/LINE INPUT] jacks 1-8 (XLR) w [MIC/LINE INPUT] jacks 1-8 (TRS phone) w [MIC/LINE INPUT(TRS フォーン)] 端子 1 ∼ 8 e [INSERT I/O] jacks 1-2 e [INSERT I/O] 端子...
Page 10
AW2400 4. Top Panel Details(トップパネル詳細) 4-1 Analog Input section(アナログ入力セクション) q [GAIN] knobs 1-8 q [GAIN] ノブ 1 ∼ 8 w [PEAK] Indicators w [PEAK] インジケーター e [INPUT SEL] keys 1-8 e [INPUT SEL] キー 1 ∼ 8 4-2 Work Navigate section(ワークナビゲートセクション) q [SONG] キー...
Page 11
AW2400 4-3 Quick Navigate section(クイックナビゲートセクション) q [RECORD] key q [RECORD] キー w [MONITOR] key w [MONITOR] キー 4-4 Display section(ディスプレイセクション) q Display q ディスプレイ w Stereo Meters w ステレオメーター e [METER] key e [METER] キー r Contrast r コントラスト t Access indicator t アクセスインジケーター...
Page 12
AW2400 4-5 Mixer section(ミキサーセクション) q [SEL] keys 1-12 q [SEL]キー 1 ∼ 12 w [STEREO SEL] key w [STEREO SEL] キー e [ON] keys 1-12 e [ON]キー 1 ∼ 12 r [STEREO ON] key r [STEREO ON] キー t Faders 1-12 t フェーダー...
Page 13
AW2400 4-6 Selected Channel section(セレクテッドチャンネルセクション) q [VIEW] key q [VIEW] キー w [DYN] key w [DYN] キー e [AUX] key e [AUX] キー r [EFFECT] key r [EFFECT] キー t [PAN/EQ] key t [PAN/EQ] キー y SELECTED CHANNEL knobs 1-4 y セレクテッドチャンネルノブ...
Page 14
AW2400 4-9 Data entry/control section(データエントリー / コントロールセクション) q [INC] key q [INC] キー w [DEC] key w [DEC] キー e [Cursor] keys ([ ] / [ ] / [t] / [s] keys) e カーソル キー ([ ] / [ ] / [t] / [s] キー) r [JOG ON] key r [JOG ON] キー...
Page 15
AW2400 4-11 Layer section(レイヤーセクション) q [IN 1-8] key q [IN 1-8] キー w [IN 9-16] key w [IN 9-16] キー e [MASTER] key e [MASTER] キー r [TRACK 1-12] key r [TRACK 1-12] キー t [TRACK 13-24] key t [TRACK 13-24] キー y [REMOTE] key y [REMOTE] キー...
AW2400 (ユニットレイアウト) CIRCUIT BOARD LAYOUT • Top Parts(トップ部) <Bottom view> (液晶ディスプレイ) Sheet PN2 assembly (シートPN2 Ass y)
Page 18
AW2400 • Bottom Parts(ボトム部) <Top view> Hard disk drive assembly MAIN (HDD Ass y) CD drive assembly (CDドライブAss y) <Rear view> AC inlet assembly <Top view> (インレットAss'y) Power supply unit (電源ユニット)
AW2400 (分解手順) DISASSEMBLY PROCEDURE Precautions(注意事項) FDシートを交換後は、 フェーダーのキャリブレーション After replacing the FD circuit board, be sure to calibrate を実施してください。 (68 ページ参照) the faders. (See page 63.) フラットケーブルの注意 Notes on Flat Cable Contacts are visible from the back. Pay attention not to 接点が裏面から透けて見えます。コネクタにケーブルの...
Page 20
AW2400 <Right side view> <Left side view> [1320B] [1320B] [1320B]: Bind Head Tapping Screw-B (Bタイト+BIND) 3.0X8 MFZN2B3 (WE774400) Fig.2 (図2) Bottom Section Disassembly Procedure ボトム部の分解 A-1. MAINシート A-1. MAIN Circuit Board (所要時間:約4分) (Time required: About 4 minutes) A-1-1 トップカバーを外します。 (1項参照) A-1-1 Remove the top cover.
Page 21
AW2400 CD Drive Assembly(CDドライブAss'y) [70] DVD & CD-R/W drive (DVD & CD-R/W) [30A] CDRW support (サポートCDRW) [30A]: Pan Head Screw (小ネジ+PAN) 2.0X2 MFZN2W3 (WE878500) Bind Head Tapping Screw-S (Sタイト+BIND) 3.0X6 MFZN2W3 (WE877900) [70]: Fig.4 (図4) A-3. JKシート A-3. JK Circuit Board (所要時間:約4分)...
Page 23
AW2400 A-6. DIOシート A-6. DIO Circuit Board (所要時間:約6分) (Time required: About 6 minutes) A-6-1 トップカバーを外します。 (1項参照) A-6-1 Remove the top cover. (See procedure 1) A-6-2 ホルダーADDAを外します。 (A-5-2項参照) A-6-2 Remove the ADDA holder. (See procedure A-5-2) A-6-3 [330]のネジ3本と[340]の特種六角ナット1個、 A-6-3 Remove the three (3) screws marked [330], the [350]のネジ3本、[360]のネジ1本を外して、DIO hexagonal nut marked [340], the three (3) screws シートを外します。...
Page 24
AW2400 A-7. 電源ユニット A-7. Power Supply Unit (所要時間:約5分) (Time required: About 5 minutes) A-7-1 トップカバーを外します。 (1項参照) A-7-1 Remove the top cover. (See procedure 1) A-7-2 ホルダーADDAを外します。 (A-5-2項参照) A-7-2 Remove the ADDA holder. (See procedure A-5-2) A-7-3 カバーACを縦にします。 (写真2) A-7-3 Set the AC cover in a horizontal position. (Photo 2) A-7-4 [260]のネジ4本を外して、電源ユニットを外しま...
Page 25
AW2400 A-9. インレットAss y A-9. AC Inlet Assembly ( 所要時間:約5分) (Time required: About 5 minutes) A-9-1 トップカバーを外します。 (1項参照) A-9-1 Remove the top cover. (See procedure 1) A-9-2 ホルダーADDAを外します。 (A-5-2項参照) A-9-2 Remove the ADDA holder. (See procedure A-5-2) A-9-3 [300]のネジ2本と[310]のネジ1本を外して、イン A-9-3 Remove the two (2) screws marked [300] and the レットAss yを外します。...
Page 26
AW2400 Top Section Disassembly Procedure トップ部の分解 B-1. シートPN2 Ass y B-1. Sheet PN2 Assembly ( 所要時間:約6分) (Time required: About 6 minutes) B-1-1 コントロールパネル面より、エンコーダーノブ 4個 B-1-1 Remove the four (4) encoder knobs and the jog knob とノブJOG 1個を外します。 (図11) from the control panel surface. (Fig.11) B-1-2 トップカバーを外します。...
Page 27
AW2400 • Sheet PN2 Assembly(シートPN2 Ass y) [110]: Button, TOP (White) (ボタンTR TOP (白)) [60]: Button L (Black) [40]: Button L (M-Gray) [100]: Button, REW (White) (ボタンTR REW (白)) (ボタンL (黒)) (ボタンL (灰)) [90]: Button, FFW (White) (ボタンTR FFW (白)) [120]: Button, REC (White) (ボタンTR REC (白)) [50]: Button L LENS (Black)
Page 28
AW2400 B-3. PN1シート B-3. PN1 Circuit Board (所要時間:約6分) (Time required: About 6 minutes) B-3-1 トップカバーを外します。 (1項参照) B-3-1 Remove the top cover. (See procedure 1) B-3-2 FDシートを外します。 (B-2-4項参照) B-3-2 Remove the FD circuit board. (See procedure B-2-4) B-3-3 [1190C]のネジ14本を外して、PN1シートを外しま B-3-3 Remove the fourteen (14) screws marked [1190C]. The す。...
Page 29
AW2400 B-4. LCDシート B-4. LCD Circuit Board (所要時間:約3分) (Time required: About 3 minutes) B-4-1 トップカバーを外します。 (1項参照) B-4-1 Remove the top cover. (See procedure 1) B-4-2 [1190D]のネジ4本を外して、LCDシートを外しま B-4-2 Remove the four (4) screws marked [1190D]. The す。 (図12) LCD circuit board can then be removed. (Fig.12) B-5.
AW2400 LSI PIN DESCRIPTION(LSI端子機能表) M66590FP-RB0S (X5423A00) USB DEVICE CONTROLLER ............30 HD6417709SF133BV (X2081A00) CPU (SH3) ................. 31 YSS910-V (XV988B00) DSP6 (Digital Signal Processor) ..............32 YSS919B-HZ (XZ693B00) DSP7 (Digital Signal Processor) .............. 33 YM3436D-FZ (XG948E00) DIR2 (Digital Format Interface Receiver) ..........34 S1D13700F01A100 (X5422A00) LCD CONTROLLER..............
Page 31
AW2400 HD6417709SF133BV (X2081A00) CPU (SH3) MAIN: IC002 NAME FUNCTION NAME FUNCTION CKE/PTK5 CK enable / Port K Mode control RAS3L/PTJ0 RAS address bus / Port J Vcc(RTC) Power supply +1.8 V PTJ1 Port J XTAL2 CASL/PTJ2 CAS address bus / Port J Crystal oscillator EXTAL2 VssQ...
Page 32
AW2400 YSS910-V (XV988B00) DSP6 (Digital Signal Processor) MAIN: IC205, 206 NAME FUNCTION NAME FUNCTION Power supply (3.3 V) Ground Ground DB13 System master clock input (60 MHz or 30 MHz) DB14 System master clock output (High or 30 MHz) DB15 Power supply (5 V) Vdd5 DB16...
Page 33
AW2400 YSS919B-HZ (XZ693B00) DSP7 (Digital Signal Processor) MAIN: IC207, 208 NAME FUNCTION NAME FUNCTION PLLEN PLL enable input (0: PLL unuse, 1: PLL use) SIO32 /TEST Test mode setting (0: TEST, 1: Normal) SIO33 AVss Analog ground SIO34 PLL filter SIO35 Serial data bus AVdd...
Page 34
AW2400 YM3436D-FZ (XG948E00) DIR2 (Digital Format Interface Receiver) MAIN: IC302 NAME FUNCTION NAME FUNCTION DAUX Auxiliary input for audio data RSTN System reset input HDLT Asynchronous buffer operation flag Vdda – VCO section power (+5 V) DOUT Audio data output CTLN VCO control input N Parity flag output...
Page 35
AW2400 AK5385AVF (X5364A00) ADC (Analog to Digital Converter) AD: IC103, 303, 503, 703 NAME FUNCTION NAME FUNCTION VREFL Lch voltage reference input SDTO Audio serial date output AVSS – Analog ground CKS1 Master clock select VCOM Common voltage output MCLK Master clock input LIN+ Lch analog positive input...
AW2400 (シート基板図) CIRCUIT BOARDS AD Circuit Board (X5630B0) ............... 54/56 DA Circuit Board (X5628B0) ............... 58/59 DIO Circuit Board (X5972C0) ..............39 FD Circuit Board (X5627B0) ............... 44/46 IDE Circuit Board (X5972C0) .............. 41/43 JK Circuit Board (X5630B0) ............... 54/56 LCD Circuit Board (X5631B0) ..............
Page 40
AW2400 MAIN Circuit Board to SLOT to AD-CN001 to DIO-CN001 to LCD-CN101 to FD-CN001 to FD-CN002 to PN1-CN001 2NAP-WD39870-1...
Page 41
AW2400 IDE Circuit Board to PW-CN007 to PW-CN008 Component side(部品側) to PN2-CN003 to PN2-CN002 Component side(部品側) MAIN: 2NAP-WD39870-1 IDE: 2NAP-WD95450-1...
Page 42
AW2400 MAIN Circuit Board 2NAP-WD39870-2...
Page 52
AW2400 PN2 Circuit Board DATA / JOG AUTOMIX UNDO / SCENE REDO JOG ON ENTER GAIN HIGH FREQUENCY HIGH-MID to ML-CN202 LOW-MID SOLO 2NAP-WD39900-1...
Page 53
AW2400 MARK CANCEL MASK SEACH LAST REC SEACH PLAY MASK SEACH LAST REC SEACH STOP STOP AUTO PUNCH SOUND REPEAT CLIP BUS/AUX NUM. LOCK REMOTE TRACK IN 9-16 13-24 TRACK IN 1-8 1-12 LAYER LOCATE / NUM Component side(部品側) 2NAP-WD39900-1...
Page 54
AW2400 AD Circuit Board to DA-CN601 to PW-CN005 GAIN8 GAIN7 GAIN6 GAIN5 GAIN4 MIC/LINE INPUT JK Circuit Board MIC/LINE INPUT AD, JK: 2NAP-WD39910-1...
Page 58
AW2400 DA Circuit Board STEREO OUT MONITOR OUT OMNI OUT PHONES MONITOR PHONES to AD-CN003 Component side(部品側) ML Circuit Board -48 -36 -30 -24 -18 -15 -12 -9 -0 OVER METER STEREO to LCD-CN103 to PN2-CN004 Component side(部品側) DA: 2NAP-WD39890-1 ML: 2NAP-WD39920-1...
Page 59
AW2400 DA Circuit Board Pattern side(パターン側) ML Circuit Board Pattern side(パターン側) DA: 2NAP-WD39890-1 ML: 2NAP-WD39920-1...
Page 60
AW2400 PW Circuit Board to MAIN-CN405 to FD-CN003 to AD-CN002 to DIO-CN007 to Power supply unit-CN3 to Power supply unit-CN6 to MAIN-CN404 to Power supply unit-CN4 Component side(部品側) Pattern side(パターン側) 2NAP-WD39920-1...
AW2400 INSPECTIONS Preparation 1-4. Installing Software (FIRM OS) 1-1. Measuring Instruments., Measuring Jigs If FIRM OS is not installed in the HDD mounted in the main Use measuring instruments which can measure the unit, FIRM OS should be installed. inspection items accurately with confidence. 1-4-1.
Page 63
AW2400 w Group Inspection 1-5. Fader calibration procedures To perform the fader calibration only, turn on the power while a. Operate the CH12 Fader 2 laps slowly (around 3 holding down the [JOG ON] key and [ENTER] key. seconds/100 mm), and 2 laps quickly (around 1 second/ Message on the display Operation 100 mm).
Page 64
Turn on the power, and keep pressing the [UTILITY] key 2-2-1.INPUT 1(BAL XLR) when the YAMAHA logo is shown on the LCD and the Parameters: Measure with INPUT 1 → STEREO L. versions of BOOT OS and FIRM OS installed will be shown q LINE Gain on the LCD.
Page 65
AW2400 2-2-4. INPUT 4 (BAL XLR) 2-2-8. INPUT 8(BAL XLR) Parameters: Measure with INPUT 4 → MONITOR R. Parameters: Measure with INPUT 8 → OMNI OUT 4. Set the MONITOR VR to MAX. Measurement items and specified values are the same as Measurement items and specified values are the same as INPUT 5.
Page 66
AW2400 3-3. Jitter Measurement Parameters: Measure the jitter of DIGITAL OUT with DSA-1. q Jitter should be WORD CLOCK SOURCE 5 nsec or below w INT 44.1 kHz FIX 5 nsec or below. e INT 48kHz FIX 5 nsec or below. r D.ST IN 44.1 kHz 15 nsec or below.
· Connect the DIGITAL STEREO IN and DIGITAL STEREO message is shown on the LCD DISPLAY. OUT connectors with a coaxial cable. AW2400 Copyright (C) 2005 YAMAHA · Connect the MIDI OUT and the MIDI IN connectors with a BOOT OS: V*.** MIDI cable.
Page 73
AW2400 3-3 Judgement PN1COM P.C.B. ML P.C.B. PN2 P.C.B. At the left end of each testing item indicating area, “™” is displayed for an item which is normally completed and “×” is displayed for an item which is ended abnormally or aborted. TOTAL DIAGNOSTICS Judgment indication 01.
Page 74
AW2400 4-3 FADER fucntion test (03 FADER) of testing item indicating area. (3) “NG: x CH y” is displayed during the test.: 03. FADER Channel y during x(UP or DOWN) is abnormal. FADER AGING OK? (4) “NG: POS x CH y” is displayed during the test.: NO : [CANCEL], YES : [ENTER] Channel y at position x is abnormal.
Page 76
AW2400 (2) Mounting/Unmounting test of the internal HDD to a PC. (A) When the following display is shown, connect the USB to the PC. 07. USB Connect USB! Check HDD mount on PC. Then HDD unmount and disconnect USB. EXIT : [CANCEL] e Check that no device is shown, and click “Close”.
Page 77
AW2400 4-8 Analog mute test (08 MUTE) 4 : CPU Interface (Address bus)...** (Adress Bus connection check) 08. MUTE 5 : CPU Interface (Data bus 1)...** (Bus W/R Analog Mute ON register test) OK : [ENTER], NG : [CANCEL] 6 : DRAM Interface (Data bus)...** (Write / Read test to DRAM) 7 : DRAM Interface (Address bus)...** (Write / Read test to entire DRAM area)
Page 78
AW2400 4-10-3 Judgment (8) If “6 : DRAM Interface ( Data bus )...NG” is displayed during the test. (1) If normal: If normal, the screen returns to the testing item indication, IC205 XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX “™”...
Page 79
AW2400 IC208 SIO57 → IC207 SI033 (3) If “NG: HD DRIVE ERROR” is displayed during the test: IC208 SIO58 → IC207 SI048 Malfunction of the HDD drive IC208 SIO59 → IC207 SI049 (4) If “NG: CPU <-> HD REGISTER (PIO) ERROR” is IC208 SIO60 →...
Page 80
AW2400 4-14-1 Test Contents (5) If “< AUDIO > NG” is displayed during the test. Audio signal in the audio line is wrong. WORD CLOCK GEN. function (X’tal OSC, VCO) test HGA (IC313, MAIN P.C.B.), DIR2 (IC302, MAIN P.C.B.) and audio lines between them should be checked. 4-14-2 Testing procedure Automatically performed and it is not necessary to operate.
Page 81
AW2400 4-15 SDRAM (HGA) function test (15 SDRAM) WCK: Clock check at WCK MSWCLK INT.48k SIO: SIO check between DSP7 and MY-SLOT (MUTE 15. SDRAM OK ! OFF/ON) Input/Output CH is connected to DSP with 4 ch/ EXIT : [ENTER] line (16 CH) /CON: /CON signal input check (Hi/Lo)
Page 86
AW2400 (2) PCへの内蔵HDDのマウント及びアンマウントテスト (ア)以下の表示がされるので、USBをPCに接続し ます。 07. USB Connect USB! Check HDD mount on PC. Then HDD unmount and disconnect USB. EXIT : [CANCEL] e何もデバイスが無いことを確認し 「閉じる」 を クリックします。 (イ)P C の 「マイコンピュータ」 でA W 内蔵のH D D (AW2400-1、AW2400-2の2 つ) がマウントされて いることを確認します。 (エ)USBケーブルをPCより抜き、AWのLCDに以下...
Page 87
AW2400 4-8 アナログミュート検査 (08 MUTE) メッセージ表示部に検査する項目名と検査判定が表示され ます。 08. MUTE Analog Mute ON 1 : CPU Interface (Data bus 1)...** (WCRレジ ストのTxBusy検査) OK : [ENTER], NG : [CANCEL] 2 : CPU Interface (Data bus 2)...** (TxBufへ のWrite / Read検査) 3 : CPU Interface (Chip Select,TXB)...** (DSPのTxBusyへのWrite / Read検査)...
Page 90
AW2400 不具合がある場合、メッセージ表示部にエラーメッ (4) 検査中にNG: CPU <=> CD REGISTER (PIO) セージを表示します。 ERROR!と表示される場合: (3) 検査中に< STATUS > NG : CHANNEL STATUS & CPU (IC002,MAINシート) ⇔CD REGISTER回路 (PIO USER BITと表示される場合: 転送) の不具合 オーディオライン中のチャンネルステータスとユー 4-14 WORD CLOCK検査 (14 W. CLOCK) ザービットが間違っています。 HGA (IC313,MAINシート) 、DIR2 ( IC302,MAINシー 14.
AW2400 HOW TO UPGRADE THE プログラムバージョンアップ方法 MAIN UNIT PROGRAM (1) Turn on the power, press the EJECT button of the (1) 電源を入れ、内蔵CD-ROMドライブのイジェクトボタ internal CD-ROM drive, set the CD-ROM for upgrading ン を 押 し 、 バ ー ジ ョ ン ア ッ プ 用 C D - R O M を in the CD-ROM drive, and turn off the power.
24 bit Push the card all the way into the slot so that the Refer to the Yamaha Pro Audio global website for the most connector at the end of the card is correctly mated with recent information on I/O cards.
AW2400 RESTORING THE INTERNAL HARD DISK TO THE FACTORY-SET CONDITION w EXECUTE button In order to restore the internal hard disk to the factory-set condition, you will need to perform the following two pro- Execute the disk initialization. A popup window will show cedures.
AW2400 MESSAGE LIST Messages A/B POINTS NOT FOUND Repeat Playback cannot be performed because A/B points are not specified. AUTOMIX ABORTED! Automix recording has been aborted. AUTOMIX DISABLED! Automix is currently disabled. Please set to ENABLE. AUTOMIX MEMORY FULL! Not enough memory available for automix. AUTOMIX RUNNING! That operation cannot be performed while automix is running.
Page 98
AW2400 THIS SONG IS PROTECTED. This song is protected, and cannot be edited or recorded. The maximum allowable number of regions* has been exceeded. TOO MANY REGIONS!! Since the AW2400 is in Trigger Track mode, this operation cannot be executed. TRIGGER TRACK MODE NOW Undo (cancellation of the previous operation) has been executed.
Page 99
AW2400 Since the song length divided by the markers would be less than four seconds, Marker Interval Under 4 sec! you cannot divide it with a marker. Media Too Small. Cannot Save! The medium does not have enough space available to save the data. No Data to Backup! No data is selected for backup.
Page 100
AW2400 メッセージリスト メッセージ A/B POINTS NOT FOUND A/Bポイントが設定されていないため、リピート再生を行なえません。 AUTOMIX ABORTED! オートミックスデータの記録を中断しました。 AUTOMIX DISABLED! オートミックスが無効になっているので、有効(ENABLE)に設定してください。 AUTOMIX MEMORY FULL! オートミックス用のメモリーに空き容量がありません。 AUTOMIX RUNNING! オートミックス再生中のため、その操作はできません。 CANNOT DEFEAT MUTE 再生トラック数の制限を超えるので、ミュートを解除できません。 CANNOT REDO リドゥ(操作の再実行)ができません。 CANNOT SET MARK 既に設定されているポジションにマーカーを設定することはできません。 CANNOT UNDO アンドゥ(操作の取り消し)ができません。 CD PLAY MODE NOW CDプレイモードのため、その操作はできません。 CH.
Page 101
AW2400 THIS SONG IS PROTECTED. このソングはプロテクトされているため、録音/編集できません。 TOO MANY REGIONS!! リージョン(*)が制限数を超えています。 TRIGGER TRACK MODE NOW トリガートラックモードのため、その操作はできません。 UNDO COMPLETED アンドゥ(操作の取り消し)が完了しました。 USB STORAGE MODE NOW USB Storageモードのため、その操作はできません。 WRONG WORD CLOCK 同期すべき接続機器からのワードクロックが適切ではありません。 Y96Kカードをお使いの場合は、シーンメモリーの97番以降はリコールできま Y96K COULDN’T RECALL せん。 Y96Kカードをお使いの場合は、シーンメモリーの97番以降にはストアできま Y96K COULDN’T STORE せん。 * リージョンとは、1回の操作でトラックに録音された一連のオーディオデータのことです。 ポップアップメッセージ...
Page 102
AW2400 データが存在しません。または、選択した範囲にはデータ(リージョン*)があり No Data! ません。 No File! ファイルがないので、呼び出しや消去、タイトルの編集ができません。 No Media! メディアがセットされていません。 No Region! リージョン(*)が見つかりません。 No Song to Write! CDに書き込むソングが選択されていません。 No Stereo Track! 4秒以上のステレオトラックを含むソングがありません。 Not 44.1kHz/16Bit Song! 44.1KHz/16bitのソングでないためリストアできません。 Number Ejected Media, 書き込まれたメディアが何番目のメディアかをメモし、次のブランクメディア Insert Blank Media. に交換してください。 Number of Media Exceeds Limit! 扱える最大メディア数を超えました。...
AW2400 MIDI DATA FORMAT 1. Functions 2. MIDI data flow diagram 1.1. Scene Change MTC SLAVE The settings of the [MIDI PROGRAM CHANGE TABLE] specify USB-1 IN MTC (MTC Slave) the scene that is recalled when a Program Change message is USB-2 IN EFF MIDI USB-3 IN...
Page 105
AW2400 3.1.7. OTHER If this is set to ECHO, the received MIDI data will be echoed at the 4.4. SYSTEM EXCLUSIVE MESSAGE transmission port. However, Program Change and Control Change 4.4.1. REALTIME SYSTEM EXCLUSIVE will follow their own settings. 4.4.1.1. MMC Command Rx/Tx function...
Page 106
AW2400 5.4. PROGRAM CHANGE (Cn) 5.10. STOP (FC) < Reception > < Transmission > If [Program Change Rx] is On, program change messages will be If [SYNC OUT] is MIDI CLOCK, this message is transmitted when received when [MIDI Rx Ch] matches. However, if [MIDI Rx Ch] is the recorder stops.
Page 107
AW2400 5.13.1.4. MMC FAST FORWARD 5.13.1.8. MMC RESET < Transmission > < Transmission > This message is transmitted with a device number of 7F when the This message is transmitted with a device number of 7F when FF key is pressed and the Cue mode is engaged. song loading is finished.
Page 110
AW2400 1320 PAGE2 Hard Disk Drive Assembly: 1320 (HDD Ass'y) See page 8 CD Drive Assembly: See page 9 (CDドライブ Ass y) view A 290a AC Inlet Assembly(インレットAss y) 230 210 290a 1390 1410 U, V only...
Page 140
AW2400 PART NO. DESCRIPTION 部 品 名 REMARKS REF NO. RANK R312 V I 1 9 6 1 0 0 Metal Film Resistor (chip) 3.3K 1/10 D RECT. チ ッ プ 金 被 抵 抗 R313 V I 1 9 4 6 0 0 Metal Film Resistor (chip) 750.0 1/10 D RECT.
Page 152
AW2400 PART NO. DESCRIPTION 部 品 名 REMARKS REF NO. RANK コ ネ ク タ ベ ー ス ポ ス ト CN001 V B 3 9 0 2 0 0 Connector Base Post PH 6P TE CN002 V B 3 9 0 5 0 0 Connector Base Post PH 9P TE コ...
Page 160
AW2400 FD CIRCUIT DIAGRAM 001 (AW2400) MULTIPLEXER OP AMP to MAIN-CN306 (Page 15:C3) MULTIPLEXER MULTIPLEXER OP AMP TRANSCEIVER OP AMP to MAIN-CN307 (Page 15:C5) OP AMP OP AMP OP AMP OP AMP TRANSCEIVER to PW-CN010 MULTIPLEXER (Page 19:E11) OP AMP TRANSCEIVER Note: Nonpolar capacitors without indications are ceramic capacitors.
Page 161
AW2400 FD CIRCUIT DIAGRAM 002 (AW2400) REGULATOR +6V OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP OP AMP NJM78L06UA(TE1) (X3620A00) D1F60 1A 600V (VS201100) REGULATOR +6V DIODE OP AMP OP AMP 1: OUTPUT 1: ANODE 2: GND 2: CATHODE...
Page 162
AW2400 IDE, JK CIRCUIT DIAGRAM (AW2400) to AD-CN101 to AD-CN301 to AD-CN501 to AD-CN701 (Page 5:U15) (Page 5:Q15) (Page 5:L15) (Page 5:G15) [MIC/LINE INPUT] 28CC1-2000000721-2 CD-RW to MAIN-CN309 (Page 15:B12) (未実装) : Not installed 28CC1-2000000716-2 2 IDE, JK CIRCUIT DIAGRAM (AW2400)
Page 163
AW2400 LCD, ML CIRCUIT DIAGRAM (AW2400) to PN2-CN004 (Page 18:P6) to MAIN -CN102 to LCD (Page 13: LCD CONTROLLER LCD Contrast to LCD Back Light Note: Nonpolar capacitors without indications are ceramic capacitors. 注:指示なき無極性コンデンサはセラコンです。 : Not installed (未実装) LCD, ML CIRCUIT DIAGRAM (AW2400) 28CC1-2000000722-2 1...
Page 164
MAIN CIRCUIT DIAGRAM 001 (AW2400) AW2400 SYSTEM RESET OP AMP OP AMP SDRAM 64M REGULATOR +1.8V CPU (SH3) FLASH ROM SDRAM 64M 8M MAIN TRANSCEIVER TRANSCEIVER µ PC2918T-E1 (X2157A00) D1F60 1A 600V (VS201100) DIODE REGULATOR +1.8V TRANSCEIVER 1: NPUT TRANSCEIVER TRANSCEIVER 2: GND 1: ANODE...
Page 166
MAIN CIRCUIT DIAGRAM 003 (AW2400) AW2400 DRAM 4M DSP 6 DRAM 4M DSP 7 INVERTER D-FF REGULATOR +2.5V DRAM 4M µPC2925T-E1-AZ (X0637A00) DSP 6 REGULATOR +2.5V DSP 7 DRAM 4M 1: INPUT 2: GND 3: OUTPUT D1F60 1A 600V (VS201100) DIODE 1: ANODE 2: CATHODE...
Page 167
MAIN CIRCUIT DIAGRAM 004 (AW2400) AW2400 PQ015EZ1HZPH (X6060A00) REGULATOR +1.5V to FD-CN001 (Page 8:T5) 1: V 2: ON/OFF (V 3: V 4: NC 5: GND D1F60 1A 600V (VS201100) FPGA DIODE to FD-CN002 (Page 8:T8) REGULATOR +1.5V 1: ANODE 2: CATHODE to DIO -CN003 (Page 7:V14)
Page 168
MAIN CIRCUIT DIAGRAM 005 (AW2400) AW2400 LED DRIVER INVERTER to PN2-CN002 (Page 18:P4) INVERTER LED DRIVER to PN1-CN001 (Page 17:N4) INVERTER to PN2-CN003 (Page 18:B8) to PW-CN007 (Page 19:E5) to PW-CN008 : Ceramic Capacitor (セラコン) (Page 19:E7) : Not installed (未実装)...
PN2 CIRCUIT DIAGRAM (AW2400) AW2400 to MAIN-CN401 (Page 16:D3) FREQUENCY GAIN DATA/JOG to ML-CN202 (Page 11:I4) to MAIN-CN403 (Page 16:D8) : Not installed (未実装) LED, Switch and Encoder Matrix PN2 CIRCUIT DIAGRAM (AW2400) 28CC1-2000000719-1...
Page 171
PW CIRCUIT DIAGRAM (AW2400) AW2400 to AD-CN002 (Page 5:E2) PQ3RD23 (X4358A00) REGULATOR +3.3V to DIO-CN007 (Page 7:J6) 1: N 2: OUT 3: GND 4: ON/OFFcont. AC IN D1F60 1A 600V (VS201100) to MAIN-CN404 DIODE (Page 16:D9) POWER (3P) 1: ANODE 2: CATHODE POWER SUPPLY UNIT (6P)
Page 172
SOFTWARE BLOCK DIAGRAM (AW2400) AW2400 METER METER (Gain Reduction) (Out Meter) COMP INPUT PATCH METER METER +48V INSERT [MIC/LINE INPUT] INSERT INSERT INPUT 1(...16) PRE FADER/ METER (1-4ch/5-8ch) LEVEL (1-8) AFTER PAN (Gain Reduction) SOLO 4BAND STEREO L METER (Out Meter) METER RECORDER METER...
Need help?
Do you have a question about the AW-2400 and is the answer not in the manual?
Questions and answers