Yamaha AW2816 Owner's Manual page 189

Mastering
12
12
To execute the writing operation, move
the cursor to the OK button and press the
[ENTER] key.
To cancel without executing, move the cursor to
the CANCEL button and press the [ENTER] key.
While the data is being written, a popup window
will display the estimated remaining time and the
progress of the operation. When writing is com-
pleted, the tray of the CD-RW will open automat-
ically.
Tip!
If the writing test has been turned on, the test will be
executed first, and then the data will be written. If a
problem is detected during the test, a message will be
displayed.
The subsequent steps will differ as follows, depending
on whether you are using Track At Once or Disc At
Once.
When using Track At Once
When writing using Track At Once has been com-
pleted, a popup window will ask you whether you
want to Finalize the media.
If you want to finalize the disc, move the cursor to the
OK button and press the [ENTER] key. The tray of the
CD-RW will close automatically, and the disc will be
finalized.
If you do not want to finalize the disc, move the cur-
sor to the CANCEL button and press the [ENTER] key.
In this case, other audio data can be added later to the
ejected CD-R media.
If you selected the CANCEL button, the following
popup window will appear, asking you whether you
want to write again on other media.
If you want to create another disc containing the con-
tents of the list in step 9, insert a new CD-R disc,
move the cursor to the OK button, and press the
[ENTER] key. The CD-RW tray will close automati-
cally, and writing will be executed once again.
184
When using Disc At Once
When writing using Disc At Once has been com-
pleted, a popup window will ask whether you want to
write once more on new media.
If you want to create another CD with the same con-
tents, insert a new CD-R/RW disc, move the cursor to
the OK button, and press the [ENTER] key. The tray of
the CD-RW drive will close automatically, and writing
will be executed once again.
Tip!
When writing is executed multiple times in succes-
sion, processing of the second and subsequent disc
will take less time than for the first disc.
Operation section