Speaker And Buzzer Volume Adjustments - Ricoh FAX4800L Operator's Manual

ROUTINE OPERATION

Speaker and Buzzer Volume Adjustments

Your machine has a built in speaker. With this speaker, you can listen to the
telephone line without picking up the handset. The speaker will be automatically
switched off just before the start of facsimile data communication.
When you are sending a fax message, you will be able to hear the line after the
machine has dialed. If the line is busy, you can press the Stop key and start
another operation without having to wait for the machine to disconnect the line.
The volumes you can adjust are;
Transmitting monitor (TRANSMISSION): Sound you hear in transmission.
Receiving monitor (RECEPTION):Sound you hear in reception.
Onhook dial monitor (ONHOOK): Sound you hear in dialing by Onhook dial.
Dialing monitor (DIALING): Sound you hear after pressing Start key.
Buzzer tone (ALARM): Volume of the buzzer when you open a cover and so on.
Key tone (SCROLL KEY): Sound you hear when you press a key on the operation
panel.
If the speaker volume is not satisfactory, you can adjust it.
1. Function 6 0 2 2 2 2 9 and 2.
2. To increase: V.
To decrease: W.
To accept: Yes.
3. Repeat step 2 for each adjustment that ap-
pears on the screen.
4. Finish: Function.
TELEPHONE CALLS
MONITOR VOLUME SET VOLUME
TRANSMISSION: ←
>>>
PRESS START YES TO END
MONITOR VOLUME SET VOLUME
TRANSMISSION: ←
>>>>
PRESS START YES TO END
→
→
45