Table of Contents
Advertisement
OTHER
Stored ID Override Option
This procedure overrides the ID Code that is stored in your machine. The override
is effective for this operation only.
Before pressing Start in the previous procedure and when Option is displayed:
1. Press , 0 and 5.
2. Enter the password that you wish to use
for this operation.
Example: 2 5 6 7 from the ten key pad
3. Yes.
4. Dial and press Start.
For how to use other options, such as
Send Later for delayed polling, see
page 27 and the pages following that.
Note: In theory, you can poll up to 200 different destinations using the above
procedure. However, this number depends on how many numbers are
currently waiting in memory to be dialed. See the table on page 305
for more information concerning the limitations to this feature.
Continuous Polling Reception
If you wish to poll a number of destinations in a continuous cycle, switch this
feature on. After the machine has polled all the specified destinations, it will start
again from the first destination.
To switch on Continuous Polling Reception, please contact a service technician.
136
ADVANCED FEATURES
ID CODE
ENTER ID CODE
_
ID CODE
PRESS YES OR CLR
2567
POLLING RECV.
ENTER NO. OR START
_
NO TO END
NO
•
↓
OPTION
DEST: 2
Advertisement
Table of Contents
