Table of Contents
Advertisement
ADVANCED FEATURES
2. The settings for switch 00 are now shown
on the bottom line of the display.
3. Press until the settings for switch 06 are
shown.
The setting that you need to change is
digit 5.
4. If you wish to change the setting, press 5.
5. Finish: Press Yes then Function.
Specifying an Image Area
1. Function 6 0 2 2 2 2 7 and 4.
2. Input the skip length then press .
You must enter a three digit value.
For example, for 75 mm, input 075.
3. Input the scan length. You must enter a
three digit value.
For example, for 95 mm, input 095.
4. Finish: Yes and Function.
The machine returns to standby mode.
Specified Image Area is available only when you are doing one of the following:
Memory Transmission (including Confidential Transmission and Transfer
Request)
Storing a document for Polling Transmission
Storing an Auto Document
SWITCH00:
00000000
SWITCH06:
00000000
Digit 5
0: The home position is "Off".
After transmission, Specified Image
Area will switch itself off.
1: The home position is "On".
After transmission, Specified Image
Area will stay active and the lamp
under the User Function Key will stay
lit.
IMAGE AREA
SKIP LENGTH:
000
SCAN LENGTH:
000
IMAGE AREA
SKIP LENGTH:
075
SCAN LENGTH:
000
1 inch is 25.4 mm. You
must input the dimensions in mm.
TRANSMISSION
PRESS YES
MM
↓
MM
PRESS YES
MM
↑
MM
87
Advertisement
Table of Contents
