Table of Contents
Advertisement
Switching the Command Information Line On/Off
This is similar to the TTI On/Off switching option for Group 3 Transmission (see
page 30).
The Command Information Line consists or the Receiver and Transmitter Terminal
IDs, the Date and Time, and the Page Number. Normally, this line is printed at the
top of each of the pages you transmit when they are received at the other end.
The top of the image will be overprinted if there is no margin at the top of the
transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch the Command Information Line off.
Note: If you switch the Command Information Line off, make sure that Label
Insertion is also off if you want the image received at the other end to be
unmarked.
To switch this feature on or off, do the following (See page 226 if you need more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
2. The settings for switch 00 are now shown
on the bottom line of the display.
3. Press until the settings for switch 02 are
shown.
The setting you need to use is digit 5.
4. If you wish to change the setting, press 5.
5. Finish: Yes Function.
USER PARAMETER
DEFAULT : 01000000
SWITCH00:
01000000
00000000
SWITCH00:
SWITCH02:
00000000
Digit 5
0: This feature is Off.
1: This feature is On.
APPENDIX E
PRINT LIST →
↑
YES TO END ↓
267
Advertisement
Table of Contents
