Table of Contents
Advertisement
OTHER
Input the time: 0 9 0 0.
Press to move the cursor and repeat step
3 for the second timer.
Input 0 6 0 0 for the timer value.
To change AM to PM and the other
way around, press #.
KEEPING THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
KEEPING THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.
5. Either:
Program the timer for another day: Go back to step 3.
Finish: Yes and Function.
Note: To print the received messages while the heater is off, press any key.
After all the messages have been printed, the heater will stay on for 5
minutes before switching off again. Because of this, the Night timer
does not give you complete security for received documents. For this
type of security, use the Memory Lock feature; see page 98.
Temporarily Switching the Heating roller on
During the Night Timer cycle that the heating roller is off, it may be switched back
on:
When you hold the Energy Saver key for a few seconds.
When you insert a document in the feeder.
When you pick up the handset, or press On Hook Dial key.
After you leave the machine alone for a while, the heating elements will turn back
off. Note that if the automatic saver mode is disabled by a service technician, the
night timer will not turn back on.
160
ADVANCED FEATURES
DAY OF WK. ↑
POWER SAVER
(TUE) ON=12:00AM
ON=12:
← →
↓
00
AM
YES TO END
Advertisement
Table of Contents
